Midnite_LS1

iTrader: (26)

I began to notice t-top rattle and more general noise after installing my SFC's...I thought they were supposed to reduce or prevent this from happening. Anyone else come across this??

RevGTO

iTrader: (12)

I noticed a lot more impact harshness and rougher ride after installing mine.

BAD99TA

That's weird, I noticed less rattles after my SFC install. What subframe connectors did you get, bolt-in or weld, box, 3-point, tubular?

y2k_ta

iTrader: (80)

The noises and rattles shouldn't be worse after SFC's are installed. Obviously the ride will be a little harsher since the car is more rigid.

Does your car seem to handle better on curves and at the track?

Midnite_LS1

iTrader: (26)

I have the bolt-on UMI tubulars...

I havent been out to the track but the car does handle better through the little curves here in west tx...

Yeah I had almost NO t-top rattle before the install but now have a little bit after...the car does seem a bit harsh now and the bumps in roads are now noticable...thats cuz I've put less than 1k miles since...I'd just hate for it to get even worse...

NYC FRANK

Same thing here. It's because our suspension is actually working instead of the F-body flexing and twisting. I did notice other small odd noises (polyurethane bushings) but zero squeaks from T-tops. I put my weld in SFC ASAP when the car was new maybe that's why?