car is lowered with bilstein hd shocks and eibech pro springs, relocation brackets?
08-11-2002, 01:52 AM
#1
TECH Enthusiast
Thread Starter
Join Date: Jan 2002
Posts: 737
Likes: 0
Received 0 Likes
on
0 Posts
car is lowered with bilstein hd shocks and eibech pro springs, relocation brackets? Yes, i just lowered/installed my car with Eibach pro springs and Bilstein HD shocks.
Do i need to install my relocation brackets? Why?
Yes, i do like hard launch <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Thanks !
Do i need to install my relocation brackets? Why?
Yes, i do like hard launch <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Thanks !
08-11-2002, 10:55 AM
#3
TECH Junkie
iTrader: (9)
Join Date: Dec 2001
Location: WA
Posts: 3,326
Likes: 0
Received 0 Likes
on
0 Posts
Re: car is lowered with bilstein hd shocks and eibech pro springs, relocation brackets? Tom,
My Prokits dropped me about 1-5/8" at all corners. This was enough to notably drop my front LCA attachment vs. the rear. With the addition of BMR relocation brackets and the LCAs attached in the lowest hole I was able to get the LCAs back parallel with the ground. This gave me a good improvement in traction.
<small>[ August 11, 2002, 10:56 AM: Message edited by: Fulton 1 ]</small>
My Prokits dropped me about 1-5/8" at all corners. This was enough to notably drop my front LCA attachment vs. the rear. With the addition of BMR relocation brackets and the LCAs attached in the lowest hole I was able to get the LCAs back parallel with the ground. This gave me a good improvement in traction.
<small>[ August 11, 2002, 10:56 AM: Message edited by: Fulton 1 ]</small>
08-11-2002, 04:39 PM
#4
TECH Enthusiast
Thread Starter
Join Date: Jan 2002
Posts: 737
Likes: 0
Received 0 Likes
on
0 Posts
Re: car is lowered with bilstein hd shocks and eibech pro springs, relocation brackets? i love the way car looks <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
DJCZ28 -- a friend of mine helped me alot, it's not hard at all, just really time consuming, even if you do it with someone!
ok, i'll go ahead and weld some brackets <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" />
DJCZ28 -- a friend of mine helped me alot, it's not hard at all, just really time consuming, even if you do it with someone!
ok, i'll go ahead and weld some brackets <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" />
