Relocation bracket and LCA question
10-29-2002 | 07:21 PM
#1
Relocation bracket and LCA question Will the Random Tech weld in relocation brackets work with the tubular BMR lower control arms? If not then I guess I'll just go with the BMR relocation brackets. Thanks
10-30-2002 | 05:01 PM
#3
Re: Relocation bracket and LCA question Although this might not apply to your application here is a link to someone that had problems with two different brands of LCA's and Relocation Brackets.
https://ls1tech.com/ubb/ultimatebb.p...;f=25;t=001216
https://ls1tech.com/ubb/ultimatebb.p...;f=25;t=001216
10-30-2002 | 05:18 PM
#4
Re: Relocation bracket and LCA question Yes, it appears that the BMR LCA's run a little on the small side. I'm not familiar with the Random Tech stuff, but I do know that the BMR relocation brackets and the BMR LCA's work fine together.