Anyone tried PPC LCA's?
#1
On The Tree
Thread Starter
Join Date: Feb 2002
Location: Dallas, TX (Flower Mound)
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
They look pretty good, spherical ends on both ends and adjustable for $180. Anyone have any reason NOT to do these? Any opinions or experiences please share.
#2
TECH Enthusiast
Join Date: Nov 2001
Location: DFW, Texas
Posts: 709
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
they will most likely rattle (cheap rodends) and the tube size is a little on the small side. i personally would run the LG poly/rod LCA's (what i have) or the new aluminum rod/rod LCA's made of 1 1/4" tubing w/ 3/4" aluminum rodends. very light and strong. i may be switching to these.
#3
TECH Regular
Join Date: Aug 2002
Location: New Hampshire
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
They will not rattle.... I took off someone elses that did.
The rod ends are teflon lined (and definitely NOT cheap...) & have been chosen for their durability after many seasons of GT Challenge & Showroom-Stock racing. Not one failure & even after 3 seasons still won't rattle.
I've had the current ones on the car for 10,000 miles & 3 or 4 track days.... nice & tight & quiet.
The rods ARE NOT tubular ... they are billet 6061 T6 aluminum.
Again... fully tested in REAL racing...
Thanks for the comments.......
Gordon
www.provenperformanceconcepts.com
<img src="http://www.provenperformanceconcepts.com/PPC%20BANNER%20468x60.jpg" alt=" - " />
The rod ends are teflon lined (and definitely NOT cheap...) & have been chosen for their durability after many seasons of GT Challenge & Showroom-Stock racing. Not one failure & even after 3 seasons still won't rattle.
I've had the current ones on the car for 10,000 miles & 3 or 4 track days.... nice & tight & quiet.
The rods ARE NOT tubular ... they are billet 6061 T6 aluminum.
Again... fully tested in REAL racing...
Thanks for the comments.......
Gordon
www.provenperformanceconcepts.com
<img src="http://www.provenperformanceconcepts.com/PPC%20BANNER%20468x60.jpg" alt=" - " />