2000FormulaMan

iTrader: (1)

Si I wanted to install the Stainless steel lines,....but when I took out the stock line from the caliper I notices that it has a lip,...and the caliper has a recess for the lip. Now the Earls stainless steel lines that I have don't have this lip. They are just flat.......so....I was worried that there won't be a tight seal between the two. PLease check out the 2 links for the pics of the stock lip and recess.

Here is brake line:

http://img343.imageshack.us/img343/9...keline1ty6.jpg

Here is the brake caliper:

http://img367.imageshack.us/img367/7697/caliper2yj7.jpg



Is there something I am missing?

1999Z28

there should be a copper washer on the line...maybe that's what you're looking at right there. Sometimes they have to be picked off bc they get smashed onto the line or caliper

asudecat

iTrader: (11)

yes that is a copper washer. It comes off.

2000FormulaMan

iTrader: (1)

ohhhhh...

That makes sens now. I thought it was lip on the brake line...

so I can re-use that copper washer with the new lines, and then it should all be good right?

Thanks!!

asudecat

iTrader: (11)

right on!

VIP1

I think you are supposed to get new copper washers. If the kit didn't come with them, you should be able to get them from an auto parts store.