Lowering the car ????
10-23-2006, 03:13 PM
#1
Lowering the car ???? I've read the sticky's and did some searches.
So I got my springs to lower the car; the next thing is to get an adjustable pan rod & LCA relocation brackets. SO my question is do you need the adjustable LCA & the relocation brackets ? Did not find any info on my searches .
Thx
So I got my springs to lower the car; the next thing is to get an adjustable pan rod & LCA relocation brackets. SO my question is do you need the adjustable LCA & the relocation brackets ? Did not find any info on my searches .
Thx
10-23-2006, 05:31 PM
#2
TECH Fanatic
iTrader: (31)
Join Date: Jun 2004
Location: Mesa, AZ
Posts: 1,284
Likes: 0
Received 0 Likes
on
0 Posts
You need the adjustable panhard rod to keep your rear centered. You need to LCA relocation brackets to maintain your suspension geometry (or you'll get poor traction). You don't need adjustable LCA's. You may need an adjustable torque arm to enable you to reset your pinion angle if it changes too much and you end up with vibration (or a few other things). Worry about the torque arm later though.