TORCHD 02 TA

iTrader: (39)

if you look in my sig, or if you have sigs off i ran a 13.3 @ 108 with a 2.2 60'. this was on khumo esctaca (sp) street tires 32 psi. i also reathere the car out at 1500 RPMs with granny speed shifting was to afraid to drive the car for fearing that i would break the stock 10 bolt. but anyways when i go from a 10 mph roll or from a dead stop i have terrible wheel hop. will LCA's and adj TA 1) give me better 60' and 2) prevent wheel hop?

which brands you recommend?

for LCAs which ones to go with tubular or boxed?

ohh yea i ahve TDs ran out the back

thanks for everoyne and thier help!!!

-jonas

trackbird

iTrader: (4)

This might help with 1/2 of your question. And, UMI makes a nice torque arm (as do others, but I've got first hand experience with the UMI TA).


https://ls1tech.com/forums/suspension-brakes/504212-best-lower-control-arms.html

Blown_Red_97z

iTrader: (3)

you could also drop that tire pressure down to around 22-25 psi which would help a little if you are not going to get some DR's or ET street tires.

Magnet

iTrader: (36)

Umi Rocks!

Urban Legend

iTrader: (5)

www.spohn.net has you covered.

UMI Performance

iTrader: (77)

Thanks Kevin and Magnet

Yes if you need any help choosing a item please feel free to send me a PM and I will be glad to help you make the right choice for your vehicle.

Thank you!
Ryan