transam69230

iTrader: (49)

Can i get my non adjustable BMR control arms into the lower hole of the relocation brackets with out having to buy adjustable arms, or an adjustable torque arm, because i heard that the the lower hole on the control arms give more bite than the top hole.

WS6 SRT-8

iTrader: (18)

My stock LCA's are in the bottom hole. I have the weld in BMR brackets. TA is stock also. I hope this helps.

2_wacko

iTrader: (2)

I adjusted my UMI ADJ LCA's to the same length as the stock LCA's, bolted right up to the bottom hole.

UMI Performance

iTrader: (77)

You will not need adjustable lower control arms for relocation brackets. The holes in the brackets are in the correct pattern to follow the arc of the control arm, this allows you to use the factory length arms and it will not move the rear end.

If I can help anymore please ask. Thank you!
Ryan

transam69230

iTrader: (49)

All i want to know is how to get the control arm into the bottom hole, i have bmr relocation brackets, and bmr control arms, right now the arms are in the first hole.

Revelation Z28

iTrader: (10)

is it that its not long enough? mount the relocation bracket end first, you may have to push the rear end foward to get it lined up to the body mount. or if you body mount it first, vise versa.

DrEvyl

iTrader: (5)

I have LG control arms that are non-adjustable, and BMR relocation brackets, and I hook up in the bottom hole just fine.