scottie dont

iTrader: (63)

is it possible to run a line lock with ABS or will it start flippin the computer out? 1998 trans am with traction control

2_wacko

iTrader: (2)

Yes it is.

https://ls1tech.com/forums/showthrea...=line+lock+abs

warp10

iTrader: (5)

Been running it for almost a year without problems.

Reject

iTrader: (24)

http://www.sjmmanufacturing.com/cam_brk_ls1.html#

Part#: SJM-2B001X

on the option, saying top or front mount, dose anyone have a picture of how it looks, or where they are talking about?

SJM Manufacturing Inc

iTrader: (5)

See attached picture. The yellow area is where the top-mounted LL solenoid would mount.

The front mount location (as shown) obviously is a more stealth approach BUT is a tad more difficult to install solely due to the location of mounting the LL solenoid (harder to drill and screw the two mounting tabs of the solenoid since there are components in front of it)

Plain and simple, if you want the solenoid to be hidden more, then the front-mount version is the way to go.

ABS/TCS operates normally when the LL is not activated.

Kits are always in stock and ready to ship w/in 24 business hours with tracking numbers.

Reject

iTrader: (24)

NICE! thank you for clearing that up. i'll be ordering up a front mount in a couple of weeks after i kill 150 bucks of debt on the credit card. thanks again!!

warp10

iTrader: (5)

I have set my Hurst in a similar fashion front mount. Make sure you disconnect the battery since you are working in an area where a battery connector is located.