Dropped Spindles?
Thread Starter
Moderator
iTrader: (11)
Joined: Mar 2002
Posts: 12,604
Likes: 7
From: East Central Florida
Dropped Spindles? Lowering springs I see a lot about. But the real
hot ticket in my opinion is dropped spindles.
These are out there for A-bodies, street rods,
probably Gen1 F-bodies. Anyone ever run across
these for Gen4 F-bodies?
Because you can get drop without changing the
A-arms or spring heights, you can then use
stock-geometry shocks, have more compression
height left for travel, etc.
hot ticket in my opinion is dropped spindles.
These are out there for A-bodies, street rods,
probably Gen1 F-bodies. Anyone ever run across
these for Gen4 F-bodies?
Because you can get drop without changing the
A-arms or spring heights, you can then use
stock-geometry shocks, have more compression
height left for travel, etc.
Re: Dropped Spindles? Never seen them for 4th gens. I helped a friend install a set on a 3rd gen once. In that case, they moved the tie rod mounts inboard to clear larger tires and we needed to chop saw the tie rods to get them screwed together far enough to get it aligned. But anyway...I have not seen any for the new cars so far.....
