wheels up?
wheels up? Ive seen many low 12 sec f bodys pull the front wheels. I am runnign11.7 @116 with 1.6 sixtys on quick time pros. I have skinnys in front. Im really not pulling the front wheels. I only have stock 3.23's. Is this why? Or is it because im running a completely stock suspension. If so what sus mods will help me pull the wheel a tad? also will a better sus lower my ets? I really dont feel any wheel spin and I hate to add weight. thnaks for oyur input
If the car is hooking up, why worry about the wheel stand. If you running in the 11s your good. I get the wheels up with a 100 shot out of the hole. You can do it on motor with 3.90-4.11s but need atleast 480-525 ftlbs and a strong torque arm tranni mount.
Wheels up looks bad to the bone, but so do 300ft smoky burnouts. I've seen camaros go 10.50's and not lift a wheel. All that matters is that you hook and go.
But I have to admit, when my build is done I secretly hope I end up with a wheels up video of my car. Given the choice of low 11's in the air or high 10's planted, I'll take 10's.
But I have to admit, when my build is done I secretly hope I end up with a wheels up video of my car. Given the choice of low 11's in the air or high 10's planted, I'll take 10's.
11 Second Club
iTrader: (29)
Joined: Jan 2007
Posts: 305
Likes: 0
From: where ever i can store my car. (palos hills,il for now)
my car is on stock suspenson and i pull the front tires like 3fingas pic
rest of mods in sig everything but the gear it went boom at super chevy show going with probally the same size but with a 9"
rest of mods in sig everything but the gear it went boom at super chevy show going with probally the same size but with a 9"
Trending Topics
11 Second Club
iTrader: (29)
Joined: Jan 2007
Posts: 305
Likes: 0
From: where ever i can store my car. (palos hills,il for now)
Really U Snapped Your U Joint That Sucks I Just Took Like 8 Teeth Off The Ring Gear And Like Two Off The Pinon Gear.
Not To Be A Smart *** But That Is Why They Make A Driveshaft Loop
Not To Be A Smart *** But That Is Why They Make A Driveshaft Loop
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Nahh it was the rear yoke. The loop is so the front of the shaft does'nt hit the ground. The car ran consistant 11.02s 11.10s 11.16s w 100 shot w/ slicks. Drag or street radials always added 5 or 6 tenths. Now the car is waiting for a cage. The local track techs got wind of the car and tech the **** out of it now. I think the motor is almost done anyway.
