Suspension & Brakes Springs | Shocks | Handling | Rotors

possible rotor problems

Thread Tools
 
Search this Thread
 
Old Aug 21, 2007 | 02:37 PM
  #1  
SaleenThenZ06Now's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 9
Likes: 0
From: Houston
Default possible rotor problems

i just bought an 03 z06, and i'd have to say i enjoy the dark side. the guy i bought it from had some pretty sweet cross/slotted brakes, but i think its about time to get some new ones. there is a lot of noise, squeaky noise, and it's not really vibrating but it kind of jumps and jerks a little bit when i'm braking and low speeds. is this a sign for new rotors? and if so should i go top of the line rotors/brakes because he has the stock brakes and pads still on there? what's a good combo? thanks!
Reply
Old Aug 21, 2007 | 03:18 PM
  #2  
ArcticZ28's Avatar
TECH Senior Member
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (14)
 
Joined: Jun 2004
Posts: 5,125
Likes: 4
From: Alexandria, VA
Default

Wrong section...

But, are you saying he has cross drilled rotors on there now or stock? It's confusing.
Reply
Old Aug 21, 2007 | 03:32 PM
  #3  
SaleenThenZ06Now's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 9
Likes: 0
From: Houston
Default

o sorry, yeah there is cross drilled now.
Reply
Old Aug 21, 2007 | 03:36 PM
  #4  
SaleenThenZ06Now's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 9
Likes: 0
From: Houston
Default

i see now, i didn't know how the sections were catagorized.
Reply
Old Aug 21, 2007 | 03:39 PM
  #5  
5301113's Avatar
TECH Resident
iTrader: (18)
 
Joined: Apr 2007
Posts: 953
Likes: 0
From: Odessa TX
Default

If it jumps and jerks it's time for new rotors

Last edited by 5301113; Aug 21, 2007 at 03:51 PM.
Reply
Old Aug 21, 2007 | 03:42 PM
  #6  
SaleenThenZ06Now's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 9
Likes: 0
From: Houston
Default

wait so will those rotors fit? which ones if they do?
Reply
Old Aug 21, 2007 | 04:16 PM
  #7  
5301113's Avatar
TECH Resident
iTrader: (18)
 
Joined: Apr 2007
Posts: 953
Likes: 0
From: Odessa TX
Default

Sorry about that
No they will not fit
Reply
Old Aug 21, 2007 | 04:52 PM
  #8  
SaleenThenZ06Now's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 9
Likes: 0
From: Houston
Default

oh ok
Reply
Old Aug 21, 2007 | 05:05 PM
  #9  
5301113's Avatar
TECH Resident
iTrader: (18)
 
Joined: Apr 2007
Posts: 953
Likes: 0
From: Odessa TX
Default

go to the vette forum and ask them about rotors .
Reply




All times are GMT -5. The time now is 04:53 PM.