strut tower brace and harder panhard bar?
#1
Teching In
Thread Starter
Join Date: May 2003
Location: Atlanta, GA
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have been looking for inexpensive suspension upgrades. Something to help keep the *** on the ground and tighten the steering and feeling through corners. I was wondering how a strut tower brace and a harder panhard bar would help me in this ploy? Any ideas? I can get them off slp's webpage for around 200 dollars total. Any help is welcomed!
![Hail](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_hail.gif)
#2
TECH Fanatic
iTrader: (1)
Join Date: Nov 2001
Location: Cumming Ga.
Posts: 1,231
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Bilstien HDs or Strano revalves before anything. Then a ST 35mm front sway with the stock 19mm rear. The STB will not do much of anything, if you have to spend some money on bracing- get some SFCs.
If you have to get a PHB, get a adjustable one. It may come in handy if you decide to lower the car in the future.
If you have to get a PHB, get a adjustable one. It may come in handy if you decide to lower the car in the future.