taking my eibach's off!
Thread Starter
On The Tree
Joined: Apr 2007
Posts: 156
Likes: 0
From: Cape May, NJ
taking my eibach's off! well i have the eibach prokit for my car and its just to low, i kno its only an 1.5 drop but my damn exhaust seems to rub on everything, i actually was thinking about leaving the front springs on and putting the stocks in the rear, has anyone done this? i mean my rear sags a little so shouldnt look that bad and plus it will squat better for the track..
anyway does anyone have pics with lowering springs in the front and stockers in the rear?
or i might just go bmr 1" drop
help me out
anyway does anyone have pics with lowering springs in the front and stockers in the rear?
or i might just go bmr 1" drop
help me out
TECH Senior Member
iTrader: (1)
Joined: Apr 2005
Posts: 8,807
Likes: 0
From: Vancouver,[KITSILANO].B.C. Canada *WestCoast*
I have Prokit springs in front...stockers minus donut in rear...and Bilstein all around....the prokit, when they were on the rear, was just too low.
Here's mine....prokit on front, stock springs on rear. When I bought the car, it had the prokit springs on all 4 corners. I couldn't get the car in the driveway. I have since swapped the Konig wheels for some black Z06 motorsports which I think look much better.
if you're gonna leave the prokits in the front and put the stockers back in the rear, i'd do the heater hose mod in the rear....otherwise, i think it will be too high in the rear in proportion to the front.
