Please help I am very upset bent arm/mount
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: May 2007
Location: Rancho Santa Margarita ,CA.
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It looks like the rear bolt and mount on my passenger side a-arm is bent backwards.the mount is slightly distorted but the bolt is very bent.I called Liverneous motor sports and spoke with a tech and he said it would ok if i straightened it my self .the rest of the front clip is in very good shape. Will I need to buy a whole new crossmember, or can this mount/bolt be bent back into a proper position. I hit a curb in the rain and the a-arm is bent everything else under the fender is in good shape other than the tie rod, endlink.there is no frame damage. I was able to drive the car in reverse home I live within 50 yards of were this happen.