60 ft times on a bone stock LS-1 vert
07-13-2003, 03:38 PM
#1
Staging Lane
Thread Starter
Join Date: Jul 2003
Location: Clarksville, TN
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
60 ft times on a bone stock LS-1 vert I was wondering what kind of 60ft times people were pulling bone stock and then after the supension upgrades. I was thinking of doing the suspension first until i get some miles on my car. Anyone know who's pulling the best 60fts and what their setup is? It's hard to determine what manuf. to go with.
07-13-2003, 11:31 PM
#3
TECH Fanatic
iTrader: (1)
Join Date: Nov 2001
Location: Cumming Ga.
Posts: 1,231
Likes: 0
Received 0 Likes
on
0 Posts
Re: 60 ft times on a bone stock LS-1 vert I've pulled a couple of 1.90s bone stock with the stock Firehawk radials. My average 60 ft was around a 2.0, got a whole crapload in that range.
07-14-2003, 03:50 AM
#4
TECH Addict
Re: 60 ft times on a bone stock LS-1 vert My biggest problem was managing the clutch - when I would dump at the line with enough RPMs,it just spins the tires. Your first step should be better grip from the tires and then a little more strength on the LCA's to keep them planted.
Many choices on LCAs - SLP's level one LCAs are a good choice also.
Many choices on LCAs - SLP's level one LCAs are a good choice also.
