Help with lower control arms please!!!
#1
TECH Fanatic
Thread Starter
Help with lower control arms please!!!
Car - 93 Camaro Z28 - 165k miles on the body and suspension.
I can NOT get off the caster (vertical) bolt out of the cross member in the passenger side front control arm/A arm. It feels like it is seized to the inner bushing sleeve. I don't have access to a lift, but I have been heating it up and hammering on it and it won't move. I have no problem cutting up the inner sleeve - but I can't get a sawzall in there and my cut off wheel won't quite fit either.
Couple pics I took of my mess.
I can NOT get off the caster (vertical) bolt out of the cross member in the passenger side front control arm/A arm. It feels like it is seized to the inner bushing sleeve. I don't have access to a lift, but I have been heating it up and hammering on it and it won't move. I have no problem cutting up the inner sleeve - but I can't get a sawzall in there and my cut off wheel won't quite fit either.
Couple pics I took of my mess.
#2
TECH Fanatic
Thread Starter
ttt... sorry, I need some advice on this one. I'm contemplating dropping the cross member all together, getting my cut off wheel, and hacking off the head of the bolt.