Camaro_Zach

iTrader: (19)

I was pretty decided on the spohn tq arm, the chrom moly one, im all about the light weight stuff. However i noticed BMR makes a chassis mount one, and so does jegs (the jegster) any comments on any of these tq arms? Thanks in advance.

fwiw, road noise/quality of ride is not an issue, this is for a drag car. Thanks.

2MCHPWR

iTrader: (10)

i would think the best drag TA is the jay fisher pontiac unit. it moves the tranny mount off the tail-shaft of the tranny. yet it is still long, unlike the BMR and spohn versions.
856-358-6911

1999Daytona500PaceCar

iTrader: (2)

I have the BMR Chromoly Adjustable PHR and LCA's, their Cross Tunnel Brace/Driveshaft Loop Combo, their Chromoly Strut Tower Brace and their Bolt-in LCA Relocation brackets and everything is top notch! Also, I have dealt with them directly and they were good to deal with. Their Chromoly Adjustable TQ Arm is on my list for future mods. So that would be my suggestion. Good luck!

Camaro_Zach

iTrader: (19)

thanks for all the replys guys. keep em commin

mitchntx

iTrader: (14)

https://ls1tech.com/threads/showflat...;Number=653007

promod1955

iTrader: (44)

IMO the wolfe torque arm is hard to beat. the crossmember fits the floor perfect. i have a 3" y-pipe and 4" exhaust so space is limited. if your into heim joints ide go wolfe or madman.

14u2nv

I personally think MADMAN'S is the best BUT he doesn't make it for a car using a Y-pipe exhaust only true duals.