got a lil list of things I'm not going to have a need for..all prices are O.B.O..open to all offers on anything you may need/want..

Delco A/C delete pully/bracket. - $30 ~SOLD~

Stock LT1 Throttle Body - $75 (un ported and unmolested)

Stock LT1 Descreend MAF sensor - $make offfer

LT1 Painted Pacesetter L/T's. - $175 pretty good shape. but have the Air pipe fitting blocked off

MSD Blaster HEI Coil - $make offer

MSD Optispark $250- works fine, has about 3k miles at the most...

Thunder 7.200 Hardend Pushrods - Sold

Comp Beehive 918 springs -SOLD

Comp steel 10* retainers - SOLD

Comp Steel 10* locks - SOLD

Comp XFi 230/236 576.571 113lsa Cam - SOLD

Comp Magnum Self Aligning 1.6RR's -SOLD

March Under Drive pulley Set (Under drive Crank w/over drive Alt.)- ~SOLD~

LT1 SLP Twin Tube CAI...$100 (comes with both filters)

Stock LT1 Alum. Heads - SOLD

Stock LT1 Intake $200

Taylor OTVC wire setup(RED), already cut to length $50 (one has elect. tape around it do it rubbed the Power steering pully but they are still good

also have a LT1 PCM with LT4 KM -$300 tuned for the cam setup by Mike at G-force, was tuned a lil consertive to spray a 100shot

I'm pretty sure I'm leaving stuff out, but this is all I can think of at the moment, prretty much I have a Complete LT1 I'm not using and parting out...Block is good with no holes or cracks..(motor locked up with the previous owner)..if you need somthing from under the hood and is not listed, feel free to PM me as I'm sure I have it and just didn't think of it


also whilling to make a package deal on the Heads assembled with the Beehive springs, Retainers, Locks, and Rockers as that is how they are assembled now.. for $350 and with the cam $425

Thanks,
Chris
409-291-3595

 

You have guide plates? May take the springs locks retainers and pushrods off your hands. Just waiting to see if HPE will tune my car first...

 

I infact do have guide plates, just have to get them back 1st..granted he can find them, I did not list them do to the fact that I wans't sure if I could even find them....they wern't on the car cause the Rocker Arms are Self Aligning

here's the story to the car...I built it up from bone stock 3years ago to a Cam only Nitrous car..well I sold it bout 6 months ago to a kid in town, and he locked up the motor, and I bought it back for a project car...when I sold it to him, I let him have everything that I had for it laying around...and the guide plates were one of those things...

 

you have any pics of the pullies?

 

not at the moment, the crank pully is still shiny though..lol....it's a billet crank pully with a black powder coated Alt pully

 

pm sent....ready to buy!

 

bump....PM's replied to

 

bumpitty bump bump

 

bump....open to any and all offers

 

i may be interested in the heads assembled, what year did they come off of?

 

My 95...

 

got the PM it said nothing about rockers?

 

sorry, left those out by mistake...but yes they will com with the heads as an assembley

 

bump for the day..all parts have been pulled off the motor..and ready to go...

 

bump......any offers considered..

also an LT1 shortblock I would like to ge rid of....has about 115k miles if that on it..would be good for a stroker build or just an extra one..make offer on that..