BBC 572 Aluminum Blower Motor $24500
06-07-2009, 03:32 PM
#1
10 Second Club
Thread Starter
Join Date: Oct 2003
Location: Lake Jackson TX
Posts: 557
Likes: 0
Received 0 Likes
on
0 Posts
BBC 572 Aluminum Blower Motor $24500 Posting this for a friend so give him a call if you have any question.
Donovan Big Block Chevy 500 Block ( 4.5"Bore x 4.5"Stroke , 572 cu.in.) Dart 360 Aluminum heads ported and polished, BDS 14-71 polished blower, Endrele 16 nozzel electronically controlled bug catcher injector with wiring harness and computer. Lunati forged blower crank, Oliver billett steel rods, venolia pistons, Ferrea HD Stainless intake and exaust valves, Isky solid roller lifters, Oddy perfection blower cam, Jackson gear drive, Billet Fabrication 8 quart kick out aluminum pan and valve covers, polished aluminum front cover. This motor was built new in 2001 by Oddy Perfection race engines in Sarasota Florida, has 30 minutes break in and tune time, plus 2 pulls on the dyno. Never been installed and is stored in a temprature controlled area. The motor produced 981 HP at 6750 RPM and made over 1000 FT. / LBS of torque at about 4200 RPM on 93 octain pump gas,with the blower at only 8.7% over . If you are building a pro street car or a heavy duty street rod and want something out of the ordinary I can save you about $15K. NO DREAMERS SERIOUS INQUIRIES ONLY, NO TRADES Complete Specifications, build sheets and dyno test available. Dave Arrington cell # 281-687-2878 Email doa169@yahoo.com
Donovan Big Block Chevy 500 Block ( 4.5"Bore x 4.5"Stroke , 572 cu.in.) Dart 360 Aluminum heads ported and polished, BDS 14-71 polished blower, Endrele 16 nozzel electronically controlled bug catcher injector with wiring harness and computer. Lunati forged blower crank, Oliver billett steel rods, venolia pistons, Ferrea HD Stainless intake and exaust valves, Isky solid roller lifters, Oddy perfection blower cam, Jackson gear drive, Billet Fabrication 8 quart kick out aluminum pan and valve covers, polished aluminum front cover. This motor was built new in 2001 by Oddy Perfection race engines in Sarasota Florida, has 30 minutes break in and tune time, plus 2 pulls on the dyno. Never been installed and is stored in a temprature controlled area. The motor produced 981 HP at 6750 RPM and made over 1000 FT. / LBS of torque at about 4200 RPM on 93 octain pump gas,with the blower at only 8.7% over . If you are building a pro street car or a heavy duty street rod and want something out of the ordinary I can save you about $15K. NO DREAMERS SERIOUS INQUIRIES ONLY, NO TRADES Complete Specifications, build sheets and dyno test available. Dave Arrington cell # 281-687-2878 Email doa169@yahoo.com
