Stuff FS
Stuff FS *B&M ripper shifter-$125
*True dual exhaust 3" with x-pipe and with dynomax ultra-flo bullets, outside of bullets have dents but the inside is round and not dented, they will come with turn downs-$325
*Comp 918 springs that I bought at Xtreme HP ans never used them. OD top 1.055" Bottom 1.290" ID: Top .650" Bottom .885" Seat Pressure: 130 lbs @1.800'' Open Pressure: 318 lbs @ 1.200'' Coil Bind: 1.100" Spring Rate: 313 lbs/in-$150
*Hardened push rods-$100
*MSD coil packs work great no problems, I have 2 sets-$425 each set
* I also have an SS hood that has some broken spots but can be fixed easily. I'll let it go for $100 firm
Prices are o.b.o but I dont need to sell just trying to free up some space if it doesnt sell then they are going to my storage unit until I can use them again. All prices are for pickup and cash only as I am busy at the house working on some cars. I will also ship as long as you have paypal or some other legit way of sending money. Thanks again guys.
*True dual exhaust 3" with x-pipe and with dynomax ultra-flo bullets, outside of bullets have dents but the inside is round and not dented, they will come with turn downs-$325
*Comp 918 springs that I bought at Xtreme HP ans never used them. OD top 1.055" Bottom 1.290" ID: Top .650" Bottom .885" Seat Pressure: 130 lbs @1.800'' Open Pressure: 318 lbs @ 1.200'' Coil Bind: 1.100" Spring Rate: 313 lbs/in-$150
*Hardened push rods-$100
*MSD coil packs work great no problems, I have 2 sets-$425 each set
* I also have an SS hood that has some broken spots but can be fixed easily. I'll let it go for $100 firm
Prices are o.b.o but I dont need to sell just trying to free up some space if it doesnt sell then they are going to my storage unit until I can use them again. All prices are for pickup and cash only as I am busy at the house working on some cars. I will also ship as long as you have paypal or some other legit way of sending money. Thanks again guys.
Last edited by dgcustomz; Jul 14, 2009 at 11:32 PM. Reason: added pics
Tool Boxes & Spohn Solid mounts I have 2 tool boxes and I only need to sell one of them. I will keep which ever one does not sell. I am asking $300 for either one.I have a Matco and a Cornwell.
Also I have a set of Spohn Solid Engine mounts I am asking $105. Let me know what you think. Thanks guys.
Also I have a set of Spohn Solid Engine mounts I am asking $105. Let me know what you think. Thanks guys.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
It is an MSC4 model. Actual part number is MSC4G. I couldn't find it on the Matco website but there are several on ebay same color. The matco tool cart I have has Snap on liners which I paid $75 for. For those of you that know about tool carts you know that these are the best liners to use. I also have 2 keys for each box. The Cornwell box also has liners but not as ggood as the snap-on's.
I had them on a 99 SS, I had a stock motor with bolt ons. Reaction is very nice and as far as the harshness I though it was pretty mild. It even picked up my engine about 1" which I was glad since Ihad the car pretty low.
I have that exact Matco sevice cart. I just don't have that side tray. I paid over $300 for mine ... they were $800 new.
An excellent box with lots and lots of room.
I'll trade you some rims for it ...
An excellent box with lots and lots of room.
I'll trade you some rims for it ...
. Sorry for the crappy shots.
