LT1 Performance MOTOR Part out!
Thread Starter
12 Second Club
iTrader: (12)
Joined: Apr 2008
Posts: 139
Likes: 0
From: San Marcos, TX
LT1 Performance MOTOR Part out! Everything MUST GO!!! DONT NEED NONE OF IT for what Im doing. Complete LT1 part out....Some go fast parts and stock parts. Car clocked a 12.97 with this set up prior to the head and intake job in the middle of summer short shifting and with a bad TUNE!!! This was a fast bitch capable of low 12's n/a with proper tune.
Stock parts have ruffly 95,000 miles on em and most performance parts have 4000 or less miles on em.
If u need parts not listed pls let me know..Got just about everything, motor is still in the car at this time so some parts will not be available until engine removal
Buyer Pays ACTUAL Shipping Cost.
GO FAST PARTS
Lunati lifters 3000mi. $150
CC PRO MAG Pushrods 3000mi $75
CC PRO MAG Full ROLLER 1.6 rockers 3000mi $200
MOROSO CAI w/low mi filter $110
BBK 52mm TB powdercoated $150
OTVC Wires $60
Meizere EWP Stuffed and ready for install $125
MATCH PORTED INTAKE (painted Graphite Grey) $150
NEWLY Rebuilt LT1 heads w/ gasket match, bowl,runners and 5 angle valve Job w/918 beehive springs. (no flow sheet but was informed that they flowed 246 after work done...typical gasket match only nets 235) $425 Willing to sale as a package deal with the intake for $525 Only 15 miles on the set since the rebuild.
CC 306 camshaft w/3000mi 544/576 w/1.6 rockers $200
LT4 Heavy Duty Timing Chain 3000mi $150
PACESETTER LTs (one does have a dent but doesnt effect it) $250 will through in Stainless Steel ARP Header Bolts w/ purchase.
2 pcm's one obd1 the other ob2 both with radical tunes $50 a peice
ACCEL Coil $20
AC DELCO OPTI 3000 mi $100
Dynotune Wet kit w/ 75 and 100 jets $275
Im sure their is stuff missing Ill add as I remember, all typical stock parts available.
LMK what ya need
thanks
sean
Stock parts have ruffly 95,000 miles on em and most performance parts have 4000 or less miles on em.
If u need parts not listed pls let me know..Got just about everything, motor is still in the car at this time so some parts will not be available until engine removal
Buyer Pays ACTUAL Shipping Cost.
GO FAST PARTS
Lunati lifters 3000mi. $150
CC PRO MAG Pushrods 3000mi $75
CC PRO MAG Full ROLLER 1.6 rockers 3000mi $200
MOROSO CAI w/low mi filter $110
BBK 52mm TB powdercoated $150
OTVC Wires $60
Meizere EWP Stuffed and ready for install $125
MATCH PORTED INTAKE (painted Graphite Grey) $150
NEWLY Rebuilt LT1 heads w/ gasket match, bowl,runners and 5 angle valve Job w/918 beehive springs. (no flow sheet but was informed that they flowed 246 after work done...typical gasket match only nets 235) $425 Willing to sale as a package deal with the intake for $525 Only 15 miles on the set since the rebuild.
CC 306 camshaft w/3000mi 544/576 w/1.6 rockers $200
LT4 Heavy Duty Timing Chain 3000mi $150
PACESETTER LTs (one does have a dent but doesnt effect it) $250 will through in Stainless Steel ARP Header Bolts w/ purchase.
2 pcm's one obd1 the other ob2 both with radical tunes $50 a peice
ACCEL Coil $20
AC DELCO OPTI 3000 mi $100
Dynotune Wet kit w/ 75 and 100 jets $275
Im sure their is stuff missing Ill add as I remember, all typical stock parts available.
LMK what ya need
thanks
sean
Last edited by seanaugustus; Nov 8, 2009 at 09:16 AM.
Thread Starter
12 Second Club
iTrader: (12)
Joined: Apr 2008
Posts: 139
Likes: 0
From: San Marcos, TX
Wires are red taylor customs and actually I think the LT's are painted.
Here are some pics that were taken during the re-assembly of the motor and of the heads after porting. Heads will come with springs but not studs.
Here are some pics that were taken during the re-assembly of the motor and of the heads after porting. Heads will come with springs but not studs.
Last edited by seanaugustus; Nov 7, 2009 at 04:08 PM.
