The "help me finish my lsx swap" sale!
08-20-2010, 09:17 PM
#1
Teching In
Thread Starter
iTrader: (8)
Join Date: Sep 2005
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
The "help me finish my lsx swap" sale! I have a few things left over from my 5.3 swap. All prices are OBO and plus shipping.
99 Pontiac Grand Am 2.4 automatic PCM Service number 16228016 $25 OBO
2005 Chevrolet Silverado intake manifold with fuel rails and injectors 65k miles(I had to rob a few o-rings for my swap) $40 OBO
2005 Chevrolet Silverado Drive-By-Wire Throttle body 65k miles $40 OBO
2005 Chevy Silverado 5.3l stock camshaft, springs, and pushrods(excellent condition) 65k miles $50 OBO
2005 Chevy Silverado 5.3l 4l60e DBW wire harness has a few plugs cut, would be a good start for a custom harness $40 OBO
2005 Chevy Silverado 5.3l 4l60e untoched PCM $100 OBO
2005 Chevy Silverado 5.3L exhaust manifolds $75 OBO
2005 Chevy Silverado 5.3L water pump 65k miles, seized up, would be good for mockup or repair $15 OBO
2005 Chevy Silverado 5.3L oil pan and pickup, pan got bumped by the salvage yard and had a small crack, I took it to a shop and had it tig'd to fix the crack then realized a truck pan hangs down too low on my swap after puttin the engine in. $60 OBO
2005 Chevy Silverado 5.3L oil pump 65k miles, works fine, friend gave me a brand new ls6 pump so I threw it in while the engine was apart, don't need this one anymore $25 OBO
2005 Chevy Silverado 5.3L cylinder heads, 706 castings, one has 2 bent valves, the other is in good condition, had to have a manifold bolt drilled out and helicoiled by a machine shop $60 for the pair OBO
2009 GMC Denali 6.2l water pump 8k miles, friend put a 6.2 in his camaro and tried clearance the waterneck on this pump to fit, would need to be tig'd or JB welded to be usable again $20 OBO
I also have a set of 706 5.3l heads from the same 65k engine, includes springs and valves, one had a manifold bolt broken off, I had this removed and helicoiled by a machine shop, the other has 2 bent valves due to the engine falling over on its side in transit with the valve cover removed(before it came into my possession). $75 OBO(dont know where to start)
2005 Chevy Silverado 6.0L 4l80e DBW harness with underhood fuseblock, excellent condition. $150 OBO
200? unknown model(I think its a truck) cable throttle body unknown miles $30 OBO
1994 Chevy C1500 cruise control box, great condition, went to DBW 5.3l, $35 OBO
88-95 c1500 2WD Thorley tri-y headers, nickel plated, were on my truck for about 8 years, still in decent shape but could use a recoat, come with lead pipes. $75 OBO
99 Pontiac Grand Am 2.4 automatic PCM Service number 16228016 $25 OBO
2005 Chevrolet Silverado intake manifold with fuel rails and injectors 65k miles(I had to rob a few o-rings for my swap) $40 OBO
2005 Chevrolet Silverado Drive-By-Wire Throttle body 65k miles $40 OBO
2005 Chevy Silverado 5.3l stock camshaft, springs, and pushrods(excellent condition) 65k miles $50 OBO
2005 Chevy Silverado 5.3l 4l60e DBW wire harness has a few plugs cut, would be a good start for a custom harness $40 OBO
2005 Chevy Silverado 5.3l 4l60e untoched PCM $100 OBO
2005 Chevy Silverado 5.3L exhaust manifolds $75 OBO
2005 Chevy Silverado 5.3L water pump 65k miles, seized up, would be good for mockup or repair $15 OBO
2005 Chevy Silverado 5.3L oil pan and pickup, pan got bumped by the salvage yard and had a small crack, I took it to a shop and had it tig'd to fix the crack then realized a truck pan hangs down too low on my swap after puttin the engine in. $60 OBO
2005 Chevy Silverado 5.3L oil pump 65k miles, works fine, friend gave me a brand new ls6 pump so I threw it in while the engine was apart, don't need this one anymore $25 OBO
2005 Chevy Silverado 5.3L cylinder heads, 706 castings, one has 2 bent valves, the other is in good condition, had to have a manifold bolt drilled out and helicoiled by a machine shop $60 for the pair OBO
2009 GMC Denali 6.2l water pump 8k miles, friend put a 6.2 in his camaro and tried clearance the waterneck on this pump to fit, would need to be tig'd or JB welded to be usable again $20 OBO
I also have a set of 706 5.3l heads from the same 65k engine, includes springs and valves, one had a manifold bolt broken off, I had this removed and helicoiled by a machine shop, the other has 2 bent valves due to the engine falling over on its side in transit with the valve cover removed(before it came into my possession). $75 OBO(dont know where to start)
2005 Chevy Silverado 6.0L 4l80e DBW harness with underhood fuseblock, excellent condition. $150 OBO
200? unknown model(I think its a truck) cable throttle body unknown miles $30 OBO
1994 Chevy C1500 cruise control box, great condition, went to DBW 5.3l, $35 OBO
88-95 c1500 2WD Thorley tri-y headers, nickel plated, were on my truck for about 8 years, still in decent shape but could use a recoat, come with lead pipes. $75 OBO
Last edited by hammered94; 01-02-2011 at 02:30 PM. Reason: items added
01-18-2011, 09:12 PM
#6
Teching In
Thread Starter
iTrader: (8)
Join Date: Sep 2005
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
I still have all of the above and I also have this to add now:
1 row of the old square coils missing one coil $20 +shipping
1 row of the d585 round heatsink coils $40 +shipping**SOLD
1 row of the old square coils missing one coil $20 +shipping
1 row of the d585 round heatsink coils $40 +shipping**SOLD
Last edited by hammered94; 01-21-2011 at 08:45 PM. Reason: sold
