Texas Classifieds Sell your items and vehicles here in Texas

90mm TB,2010 Camaro LT's,

Thread Tools
 
Search this Thread
 
Old 01-05-2011, 12:16 PM
  #1  
On The Tree
Thread Starter
iTrader: (11)
 
rms-man's Avatar
 
Join Date: Jun 2005
Location: Left Texas, now in Camarillo, CA
Posts: 140
Likes: 0
Received 0 Likes on 0 Posts

Default 90mm TB,2010 Camaro LT's,

Holley 90mm Throttle Body LS1 F-body Cable Drive


...Also includes IAC motor and TPS sensor. Ready to bolt-on. I removed this from a Camaro that was getting traded in. Never been ported or blade drilled.

$260 cash local pickup, add 3% using Paypal

http://www.jegs.com/i/Holley/510/112...0002/-1?CT=999







-------------------------

American Racing Brand Headers 2010 Camaro ARH 1 7/8" New in Box
3" x-pipe and Offroad Pipes(no cats)
This set is brand new in the box straight from ARH and will connect to the stock mufflers or aftermarkets.

Car was sold before these went on and now are collecting dust.

$1600 cash local pickup or add 3% using Paypal


Thx, Joshua





-------------------------------

Kenne Bell Boost-A-Pump 40 amp - Supercharged, Turbocharged
This was pulled off a '07 Vette that we did a Vortech Supercharger on. Decided to turn up the boost and added a inline fuel system and didn't need the BAP anymore. This comes with the Hobbs switch to come on at 3psi and all the wiring is there. This box is wired for full voltage when triggered. (17.5volts) Only used it about a month before we pulled it and turned up the boost. Works perfect and we installed it brand new a month ago.

$200 cash local pickup, add 3% using Paypal



-------------------------

Texas Speed 224/224 .581/.581 112LSA

1400-6300 RPM Power Band
This camshaft typically gains approximately 30-35rwhp.

I removed it from a '99 Vette and installed a blower spec cam instead and added a supercharger. Cam has about 10,000 miles on it. It is used, but in great shape and ready to be used again.

$220 cash local pickup, add 3% using Paypal





------------------
Old 01-05-2011, 12:38 PM
  #2  
9 Second Club
iTrader: (13)
 
soloman369's Avatar
 
Join Date: Nov 2006
Location: League city, Tx
Posts: 544
Received 11 Likes on 8 Posts

Default

Does that tb fit a stock ls6 intake looks like it has four bolts
Old 01-05-2011, 12:59 PM
  #3  
On The Tree
Thread Starter
iTrader: (11)
 
rms-man's Avatar
 
Join Date: Jun 2005
Location: Left Texas, now in Camarillo, CA
Posts: 140
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by soloman369
Does that tb fit a stock ls6 intake looks like it has four bolts
I think you can buy a adapter plate to mount it to a LS6 3-bolt pattern. It was mounted to a FAST 90mm before.
Old 01-07-2011, 08:27 AM
  #4  
On The Tree
Thread Starter
iTrader: (11)
 
rms-man's Avatar
 
Join Date: Jun 2005
Location: Left Texas, now in Camarillo, CA
Posts: 140
Likes: 0
Received 0 Likes on 0 Posts

Default

Bump for the sunny Friday.
Old 01-08-2011, 04:00 PM
  #5  
On The Tree
Thread Starter
iTrader: (11)
 
rms-man's Avatar
 
Join Date: Jun 2005
Location: Left Texas, now in Camarillo, CA
Posts: 140
Likes: 0
Received 0 Likes on 0 Posts

Default

I messed up and didn't list everything in the title.




All times are GMT -5. The time now is 08:26 AM.