89 vette project with zr1 body and 5.3
#1
Thread Starter
On The Tree
iTrader: (10)
Joined: Jan 2009
Posts: 113
Likes: 0
From: Home town Houston station in ft hood
89 vette project with zr1 body and 5.3
ok guys the ls swapped c4 vette project i was gonna do fell through since the guy quit his job now ive got a vette sitting in my drive way the wife wants gone.
ive got car as a roller now all it needs is motor will sell with the 5.3 that i was gonna install
any questions ask away
looking for say 1500 for roller 2000 with the 5.3
also willing to trade for cash and parts for my 2000 formula
ive got car as a roller now all it needs is motor will sell with the 5.3 that i was gonna install
any questions ask away
looking for say 1500 for roller 2000 with the 5.3
also willing to trade for cash and parts for my 2000 formula
Last edited by DarknessHunter; 07-12-2011 at 02:37 PM.
#5
Thread Starter
On The Tree
iTrader: (10)
Joined: Jan 2009
Posts: 113
Likes: 0
From: Home town Houston station in ft hood
yup he abandon the build quit his job and moved so now im stuck with it in my drive way.
motor is a 5.3 with new rod and main bearings, has 706 heads and complete fbody intake setup with injectors fuel rail coils and everything has the swap mounts installed on it
what it needs to finish
transmission
to be wired
wiring (i have the harness just not modded yet)
fuel lines made
have the full exhaust will need to be modded to mount to new exhaust manifolds
ill see if i have pics of car on my phone if not ill have a buddy take some and post them
yes has digi dash but needs new lcds
motor is a 5.3 with new rod and main bearings, has 706 heads and complete fbody intake setup with injectors fuel rail coils and everything has the swap mounts installed on it
what it needs to finish
transmission
to be wired
wiring (i have the harness just not modded yet)
fuel lines made
have the full exhaust will need to be modded to mount to new exhaust manifolds
ill see if i have pics of car on my phone if not ill have a buddy take some and post them
yes has digi dash but needs new lcds
Trending Topics
#10
Thread Starter
On The Tree
iTrader: (10)
Joined: Jan 2009
Posts: 113
Likes: 0
From: Home town Houston station in ft hood
i was told its a zr1 aftermarket bodykit
i searched for body kits and it looks to be this one but alot of the kits look the same with different names
http://www.mamotorworks.com/corvette-3-41-3207.html
i searched for body kits and it looks to be this one but alot of the kits look the same with different names
http://www.mamotorworks.com/corvette-3-41-3207.html
Last edited by DarknessHunter; 03-09-2011 at 09:08 PM.
#16
Thread Starter
On The Tree
iTrader: (10)
Joined: Jan 2009
Posts: 113
Likes: 0
From: Home town Houston station in ft hood
well stripping wouldnt be hard most of the dash is taken apart so i could get to things and alot of interior trim should be replaced it can be cleaned up and put back together but thats up to who ever wants it i found a vette salvage yard in san antonio so i can give who ever buys it the info to get what ever replacement parts they want
says curb weight is 3,229 but thats with the big old heavy iron 350 and 700r4
http://auto.howstuffworks.com/1989-corvette1.htm
also its a targa top
says curb weight is 3,229 but thats with the big old heavy iron 350 and 700r4
http://auto.howstuffworks.com/1989-corvette1.htm
also its a targa top