Gen 1 sbc engine parts in San Antonio
#1
12 Second Club
Thread Starter
iTrader: (23)
Join Date: May 2007
Location: San Antonio, TX
Posts: 652
Likes: 0
Received 0 Likes
on
0 Posts
Gen 1 sbc engine parts in San Antonio
Copied from my craigs list ad:
Im going with a different setup on my car so all these parts will no longer be needed. The engine will be pulled out next weekend but most of the other parts are available now. heres what I have:
standard bore 350 2 bolt main shortblock that has been rebuilt. no cam- $300
World sportsman II heads with P & P on I/E sides. these are the 200 cc versions with dual springs good to .600 lift, straight plug, 64 cc, and acc. holes.- $550
Summit racing 1.5 aluminum full roller rockers with lock nuts. scratched up a bit from coming loose on first start up but work as they should. - $125
Edelbrock Performer RPM intake manifold with stewart warner 180* thermostat and chrome water neck.- $old
MSD Street Fire HEI distributor. Clean and works good. - $old
Holley 3310-6 carb, 750 cfm vacuum secondaries. -$ 75
Serpentine brackets from 92 camaro, will include pwr steering pump with new high pressure hose. - $100
T-5 trans from 92 camaro. works good but grinds a little into 3rd and 4th if shifting fast. shifter included. - $125
GMPP flywheel and Ram clutch kit for t-5 . about 1000 miles on clutch kit - $200
MAC mid length headers and Y pipe for single cat LT1 camaro/trans am. a little rusty but not dented. - $225
please call 210-912-5234 if interested. No text please!
Im going with a different setup on my car so all these parts will no longer be needed. The engine will be pulled out next weekend but most of the other parts are available now. heres what I have:
standard bore 350 2 bolt main shortblock that has been rebuilt. no cam- $300
World sportsman II heads with P & P on I/E sides. these are the 200 cc versions with dual springs good to .600 lift, straight plug, 64 cc, and acc. holes.- $550
Summit racing 1.5 aluminum full roller rockers with lock nuts. scratched up a bit from coming loose on first start up but work as they should. - $125
Edelbrock Performer RPM intake manifold with stewart warner 180* thermostat and chrome water neck.- $old
MSD Street Fire HEI distributor. Clean and works good. - $old
Holley 3310-6 carb, 750 cfm vacuum secondaries. -$ 75
Serpentine brackets from 92 camaro, will include pwr steering pump with new high pressure hose. - $100
T-5 trans from 92 camaro. works good but grinds a little into 3rd and 4th if shifting fast. shifter included. - $125
GMPP flywheel and Ram clutch kit for t-5 . about 1000 miles on clutch kit - $200
MAC mid length headers and Y pipe for single cat LT1 camaro/trans am. a little rusty but not dented. - $225
please call 210-912-5234 if interested. No text please!
Last edited by camaroboricua; 04-23-2011 at 06:58 PM.
#4
12 Second Club
Thread Starter
iTrader: (23)
Join Date: May 2007
Location: San Antonio, TX
Posts: 652
Likes: 0
Received 0 Likes
on
0 Posts
I dont know on my set up. But the heads helped put down over 500whp on the 406sbc they were on before I got them. When I got them they had been gone through by a machine shop and Ive only put about 2-3k miles on them.