Aeromotive 11106
#1
On The Tree
Thread Starter
iTrader: (13)
Join Date: Aug 2005
Location: Houston, Texas
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
Aeromotive 11106
Durable High Performance for Low to Medium HP Applications
For fuel injection with base pressure between 30-65 psi or carburetion, this pump feeds anything from 150 to 900 horsepower. Also in a Platinum edition for a show-quality polished finish.
Used for maybe 50 miles. Needed more fuel. $250 shipped!
John
Specifications
-8AN inlet port
-6AN outlet port
Flow exceeds 450 lbs/hour @ 13.5 volts/45 psi
Fully-submersible for custom in-tank placement
Fuel injected engines:
Up to 700 HP for naturally aspirated
Up to 500 HP for forced air induction
Use regulator #027-13101 or #027-13109
Carbureted engines:
Up to 900 HP for naturally aspirated
Up to 700 HP for forced air induction
For fuel injection with base pressure between 30-65 psi or carburetion, this pump feeds anything from 150 to 900 horsepower. Also in a Platinum edition for a show-quality polished finish.
Used for maybe 50 miles. Needed more fuel. $250 shipped!
John
Specifications
-8AN inlet port
-6AN outlet port
Flow exceeds 450 lbs/hour @ 13.5 volts/45 psi
Fully-submersible for custom in-tank placement
Fuel injected engines:
Up to 700 HP for naturally aspirated
Up to 500 HP for forced air induction
Use regulator #027-13101 or #027-13109
Carbureted engines:
Up to 900 HP for naturally aspirated
Up to 700 HP for forced air induction