Well i got bored the other day and been wanting one for a while now on my ride so I made a few. There aluminum 1/4 Inch aluminum water jet cut valley cover they are rough cut. I can probably engrave these also if interested. I see stock covers go for 60-70 so ill price these right at 70 a piece here is a quick picture of one.

Thanks Fellas

 

it looks good but what about the knock sensors on a gen3, these would only work on genIV blocks

 

Gotta relocate knock sensors to side of block. On gen3.
On gen 4 the plate does not have the notch for cam sensor or oil psi sensor.
The oil psi sensor on gen4 cover is threaded for sensor.
I use to make these back in the day. Just throwing some info out there.

 

These can also be modified for gen 3 knock sensors

 

Bump...