MWC Fab 9 and 4130 Suspension
#1
MWC Fab 9 and 4130 Suspension
I have a Narrowed Fabricated 9" Housing built by Mid West Chassis. It is 56" Axle flange to axle flange. Has 40 Spline Gub drilled, Ultra light Strange Axles with 5/8 x 3" Wheel Studs. Has back brace and is setup for rear mount Coil overs. I also have Racecraft brackets for the stock spring mounts and shock mounts if anyone wants to change it. Has Wheelie bar brackets and tie downs, Drain and Fill. Adjustable Lower Control arm mounts that are offset.
Comes with MWC 4130 Lower Control arms with rod ends, MWC 4130 Panhard bar with rod ends if needed, MWC 4130 Torque arm, and Anti Roll bar. Was used for mock up and was never run. Still in bare metal, Has NOT been painted or powder coated.
ASKING 2400.00 OBO
Pics available upon request. Will email them or text them to you !
email tim@gapracing.net
or text 832-882-2804
Comes with MWC 4130 Lower Control arms with rod ends, MWC 4130 Panhard bar with rod ends if needed, MWC 4130 Torque arm, and Anti Roll bar. Was used for mock up and was never run. Still in bare metal, Has NOT been painted or powder coated.
ASKING 2400.00 OBO
Pics available upon request. Will email them or text them to you !
email tim@gapracing.net
or text 832-882-2804
Last edited by Timmy P; 01-27-2013 at 09:04 AM.