Fbody swap, built th400, converter, crossmember, driveshaft
06-05-2013, 01:04 PM
#1
Teching In
Thread Starter
Join Date: Nov 2011
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Fbody swap, built th400, converter, crossmember, driveshaft Just like the ad says, complete swap for a f body.
I got this swap on a trade, and have been running it for a while in a 2002 z28.
Tranny - built th400 by james lovelady, freshened up about 2000 miles ago. Has been to track twice about 6 passes on it. Forward manual valve body, deep pan, lokar dipstick. Works great, its behind a 370 in a 3800# fbody, made 460rwhp on a dyno on motor thru this setup.
Converter - not 100% sure on the partnumber, its a nice tci 4000 converter. 8-9.5", all the goodies for a power adder. New it goes for around $1100 in jegs
bmr th400 swap crossmember - has the stock torque arm welded on it if you still run a stock torque arm.
Custom built driveshaft also included. Made to fit the fbody with this tranny. 44-1/2" center to center is the length
the tranny is currently in the car, serious buyer come look at it, we can drive it so u see what ur buying
$1750 for all
justin - 9365374149
I got this swap on a trade, and have been running it for a while in a 2002 z28.
Tranny - built th400 by james lovelady, freshened up about 2000 miles ago. Has been to track twice about 6 passes on it. Forward manual valve body, deep pan, lokar dipstick. Works great, its behind a 370 in a 3800# fbody, made 460rwhp on a dyno on motor thru this setup.
Converter - not 100% sure on the partnumber, its a nice tci 4000 converter. 8-9.5", all the goodies for a power adder. New it goes for around $1100 in jegs
bmr th400 swap crossmember - has the stock torque arm welded on it if you still run a stock torque arm.
Custom built driveshaft also included. Made to fit the fbody with this tranny. 44-1/2" center to center is the length
the tranny is currently in the car, serious buyer come look at it, we can drive it so u see what ur buying
$1750 for all
justin - 9365374149
Last edited by stockblock85_22; 06-05-2013 at 01:10 PM.
