Pollo432

iTrader: (21)

Need some go fast parts to finish up projects, stall, cam,money, intake anything that'll help me out. Need heads, stall and stall for 410 stroker rcsb silverado, meth kit for turbo truck. Springs, pushrods, stall for T/A, going to install ms4 cam. Open to pretty much anything. Lmk

Specs on turbo.

Ball Bearing GT45 76mm Wheel Turbo Charger
Stage III Ceramic Ball Bearing on Compressor Side
Anti Surge Turbo Inlet with Vband Oulet
1.15 A/R Turbine Housing For Super High Exhaust Flow Motors
T4 Flange to Manifold
V-Band Downpipe Flange: 3.5" ID (4.5" OD)
V-Band Turbo Compressor Outlet: 3.25" ID (4.5" OD)
Works for Many Bigger HP Applications
Exactly Same as the Picture Below
Professional Installer Is Highly Recommend

Item(s) Specification :
- 5" Air Inlet
- 3.25" Vband Compressed Air Outlet
- Ceramic Ball Bearing on Compressor Side Compressor
- Turbine Housing Flange: Standard T4
- Exhaust Outlet: 3.5" V-Band
- Oil Cooled
- Compressor: 0.60 A/R
- Turbine: 1.15 A/R - Compressor Wheel (Major/Exducer): 76.6/103.6mm
- Turbine Wheel (Major/Inducer): 77.4/88.9 mm

I did modify compressor outlet to take a silicone coupling instead of a vband.

Pollo432

iTrader: (21)

Bump it up.

Pollo432

iTrader: (21)

Bump. Something reasonable need it gone!!!

imma_stocker

iTrader: (19)

Location, price, and new/used?

Pollo432

iTrader: (21)

$525 OBO. Odessa/San Antonio. Was bolted up and started. Literally ran for 2 min. That's it.