Forged LH4 347 (Needs Rebuild)
02-20-2014 | 12:48 PM
#1
Forged LH4 347 (Needs Rebuild) I've got the lh4 347 that was in my car for a couple of years making 950rwhp for sale. It saw a little bit of detonation and chipped 3 of the mahle 4032 pistons. Still ran when I pulled it.
LH4 0.030 3.905" bore
Scat I-Beam Rods (look to be fine)
Mahle 4032 pistons -8cc I believe (have part #)(3 are busted)
ARP Main Studs
ARP Rod bolts
Worst cylinder:
You MIGHT, and I mean, MIGHT be able to hone this engine, replace the 3 pistons, and have a very cheap, forged shortblock. That's a judgement call for someone who wants to risk it or knows more about building engines than me.
It was recommended to me at my power level to go ahead and take it to a 3.910 bore, and order a custom set of 2618 pistons if I were to reuse it. I don't need this block b/c I'm going with an ls3 416. This is for the shortblock only. No covers, oil pump, etc.
$1k picked up. I might deliver it for someone local if you don't have a truck. Not interested in lowball offers. I can do the math on parting it out too
LH4 0.030 3.905" bore
Scat I-Beam Rods (look to be fine)
Mahle 4032 pistons -8cc I believe (have part #)(3 are busted)
ARP Main Studs
ARP Rod bolts
Worst cylinder:
You MIGHT, and I mean, MIGHT be able to hone this engine, replace the 3 pistons, and have a very cheap, forged shortblock. That's a judgement call for someone who wants to risk it or knows more about building engines than me.
It was recommended to me at my power level to go ahead and take it to a 3.910 bore, and order a custom set of 2618 pistons if I were to reuse it. I don't need this block b/c I'm going with an ls3 416. This is for the shortblock only. No covers, oil pump, etc.
$1k picked up. I might deliver it for someone local if you don't have a truck. Not interested in lowball offers. I can do the math on parting it out too
