317 milled .025 ptv clearance
10-19-2020 | 03:14 PM
#1
Thread Starter
Teching In
Joined: Feb 2020
Posts: 5
Likes: 0
317 milled .025 ptv clearance I have a set of 317 heads milled. 025 to .030 for a lq4 bored to 6.2. The cam i want to use is a 236/246 .612 /.612 lift 110 lsa. My question is wil i have ptv clearance issues and is this a good set up? What head gasket to use as well?
Last edited by Joejohnson; 10-20-2020 at 02:57 PM.