HPTuners Pro, Misc nitrous controllers and stock 08' G8 GT rim/tires
11-22-2021, 03:00 PM
#1
Teching In
Thread Starter
Join Date: Jul 2015
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
HPTuners Pro, Misc nitrous controllers and stock 08' G8 GT rim/tires Hello,
Have some stuff that has been sitting in my garage for a few years now, some have never been used/installed. Have decided to go a different route after all these years of downtime. All prices are negotiable, I am just basing prices off what they were when I purchased them. If interested DM me and if a closer look is needed we can video call for visual inspection. Not interested in trades at the moment.
I am located in Brownsboro, TX - Near Tyler, TX - I have no problem driving to meet somewhere in Texas (Corpus, Houston, Dallas, etc.)
HP Tuners VCM l Suite Pro - no longer available
Nitrous Express Maximizer 4 Progressive Controller - $200.00 (Never installed, never been used - thought I had original instructions but they got ripped in half. NX Website will provide installation instructions)
Lingenfelter LNC-2000 Launch Control Module for GM LSx Series engines - $200.00 (Never installed, never been used - original installation manual)
Stock 2008 G8 GT 19'' rims w/ Nitto Motivo tires - $400 (still fair amount of tread left on tires, they have been kept indoors at all times - no dry rot on tires. Rims are dirty/brake dust but have normal wear and tear on them. 1 valve stem may have popped out - I will check for those interested and repair before selling)
Have some stuff that has been sitting in my garage for a few years now, some have never been used/installed. Have decided to go a different route after all these years of downtime. All prices are negotiable, I am just basing prices off what they were when I purchased them. If interested DM me and if a closer look is needed we can video call for visual inspection. Not interested in trades at the moment.
I am located in Brownsboro, TX - Near Tyler, TX - I have no problem driving to meet somewhere in Texas (Corpus, Houston, Dallas, etc.)
HP Tuners VCM l Suite Pro - no longer available
Nitrous Express Maximizer 4 Progressive Controller - $200.00 (Never installed, never been used - thought I had original instructions but they got ripped in half. NX Website will provide installation instructions)
Lingenfelter LNC-2000 Launch Control Module for GM LSx Series engines - $200.00 (Never installed, never been used - original installation manual)
Stock 2008 G8 GT 19'' rims w/ Nitto Motivo tires - $400 (still fair amount of tread left on tires, they have been kept indoors at all times - no dry rot on tires. Rims are dirty/brake dust but have normal wear and tear on them. 1 valve stem may have popped out - I will check for those interested and repair before selling)
Last edited by Ziggins; 12-10-2021 at 05:21 PM. Reason: price change
