When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Moved onto a larger cube motor so looking to sell the top end and a few parts from the old setup. Short list is below:
Top End Setup: PRC 247's that have been beautifully worked over by Greg Good with valve springs, rocker arms, and push rods. Port matched FAST 102, TSP custom cam (247/259 on a 115 with .649/.649) Lightweight intake valves, stainless exhaust valves. $4500
K1 4.00" Crankshaft and Mahle Piston Set: Bearings had spun in old motor, so will need inspected / turned. Mahgle piston set from the same setup. 4.065" bore pistons. Sold
Improved Racing Crank Scrape / Windage Tray: Improved Racing crank scraper with windage try for 4" stroke F-body pan. Sold