Texas Classifieds Sell your items and vehicles here in Texas

F/S 2000 White Z28 B4C

Thread Tools
 
Search this Thread
 
Old 09-10-2008 | 01:05 AM
  #1  
jdmoore144's Avatar
Thread Starter
Teching In
iTrader: (7)
 
Joined: Aug 2007
Posts: 26
Likes: 0
From: Fort Worth, TX
Default F/S 2000 White Z28 B4C

I am selling my 2000 Camaro Z28 B4C. I am located in Fort Worth, TX. The mods total over $14000. Looking to get $8250. All motor parts and drivetrain parts have less than 3500 miles. Car put down 501hp & 451tq.

Intake needs to be taken off cuz there is a vacuum leak somewhere. Also needs 3 coil packs and a retune. This is the reason I am selling so cheap. Need to sell the car cuz I dont have alot of time to work on it with working and going to school. Registration is out but I will renew before I sell. So is inspection but cant get that done cuz car is throwing Cel light.

Can get pics of anything you want. Will have pics hopefully tomorrow of the new intake.

Also have a TNT F1 dual nozzle nitous kit I will throw in also.
Engine-

LQ9 based 408
Eagle Crank
Scat Rods with ARP bolts
Total Seal Stainless Top Ring w/ Napier 2nd Ring
Diamond Racing -2cc pistons
PRC CNC ported L92 heads w/ hollow stem valves
PRC Dual Valve Springs and Titanium Keepers
Texas Giant Cam 9248/254,.612/.622,110+2)
TSP Chromeoly 7.4" pushrods
LS6 ported and shimmed oil pump
GMPP L76 carb style intake w/ elbow, 38lb injectors
PTM 90mm TB
Cometic Head Gaskets
Pacesetter Coated No emmisions headers
Red MSD Spark Plug Wires
FastToys 85mm Lid
Custom 100mm maf
Walbro 255 Fuel Pump
TSP Rumbler X True Duals
Optima Yellow Top Battery

Suspension-

Eibach Prokit
Bilstein Stuts and Shocks
BMR Lower Contol Arms
BMR Panhard Bar
UMI Subframe Connectors (not installed but will go with car)

Drivetrain-

TDP clutch w/ Billet flywheel
Tranny built by Jason at TDP rated at 700-800hp
New slave Cylinder
New master cylinder
Rearend Rebuilt with 4.10s
Aluminum Driveshaft
B&M shifter

Wheels & Tires-

35th Anniversary SS wheels (have alittle curb rash but still in good condition)
Khumo ASX 275-40-17 (fronts have about 3000 miles and the rears less than 750)
Konig 17x9 (2 of them have Nitto 555r DR and the other 2 are bare)

Interior-

No radio but will throw when in with it. Brand new alpine.

Exterior problems will be shown in pics. Most the the problems were done before I bought the car. Front bumper was scrapped while pulling into the driveway at his new house. Driver side scrap was down when his wife was pulling out of his driveway when he first bought the car. There is 2 hail dents on the hood. Passenger Sideskirt is messed up pretty bad. A lady ran me off the road about a month ago.

Interior problems- the door panels have a crack on each one next to the window contoller. The boot that covers up the shifter is broken but it will still put on. The carpet is wore out under the gas pedal. Most of the driver side interior is out. Have all the parts.



Old 09-10-2008 | 01:06 AM
  #2  
jdmoore144's Avatar
Thread Starter
Teching In
iTrader: (7)
 
Joined: Aug 2007
Posts: 26
Likes: 0
From: Fort Worth, TX
Default

































Old 09-10-2008 | 12:07 PM
  #3  
WizeAss's Avatar
10 Second Club
iTrader: (5)
 
Joined: Jul 2005
Posts: 2,958
Likes: 0
From: by my computer
Default

This is a very good deal. This car is pretty fast!

btw, thought it had a carb intake with rails?? maybe I was thinkin of something else???
Old 09-10-2008 | 01:24 PM
  #4  
jdmoore144's Avatar
Thread Starter
Teching In
iTrader: (7)
 
Joined: Aug 2007
Posts: 26
Likes: 0
From: Fort Worth, TX
Default

Originally Posted by WizeAss
This is a very good deal. This car is pretty fast!

btw, thought it had a carb intake with rails?? maybe I was thinkin of something else???
it does. i dont have any pics of it yet.
Old 09-11-2008 | 04:25 PM
  #5  
ChaoSS's Avatar
TECH Apprentice
iTrader: (6)
 
Joined: Dec 2003
Posts: 379
Likes: 0
From: Houston, TX
Default

looking forward to those pics. been online all day looking up parts

i'm good to go with the cash whenever you are...just let me know and i'll have the trailer

but for now i gotta go hide from Ike.

later
Old 09-13-2008 | 04:06 PM
  #6  
jdmoore144's Avatar
Thread Starter
Teching In
iTrader: (7)
 
Joined: Aug 2007
Posts: 26
Likes: 0
From: Fort Worth, TX
Default

Bump to the top!!!!




All times are GMT -5. The time now is 09:36 AM.