well i flooded my motor out right after Ike....doing something like this




lol smart huh?




anyways i picked up an L92 from nineball




and a built stage 3 tranny from ACE with a 3200 stall




i wanted to keep my factory harness and computer (01 truck)

so i ditched the stock cam and picked up a small comp cam and a few other adapters from katech and got this converter box from lingenfelter that converts the 58thooth signal back to the older 24 signal for the reluctor wheel....

ii also got a 4 bolt nick williams throttle body

 

here is the motor pretty much back togeather after the new cam, ls2 timing cover and my old 5.3 accessories on it



and then now the cluster ****!

 

i found out yesterday that my injector harness wont work b/c they are the old Minitimer style and the new motor has the uscar type plug.....so i ordered some adapters from race tronix......


i also got me some new wheels and tires

20x12 welds and some 37/13.50.20s






you can see my blitzkrieg race hubs....(99-07 chevy trucks from the factory have a flawed design in there front hubs....there sealed non greeseable....piece of ****)

 

i wanna throw about 125 wet shot on it and get a built rearend and call it a done....if im not happy with the preformance out of it.....then i will sell the ******! hahahah


let me know what yall think


Mike,

 

Time to change your username

 

so you putting a body or suspension lift on that so the tire/wheels combo fit better

 

I think you could have left the "better" off... and just said ... "so the tire/wheels combo fit"

Pre-runner fenders... leave it low so you can really use that 125 shot

 

the front has a fabtech 7inch fabtech and the rear is stock.....


imma try and get the rest of the wheels mounted this week. the picture of the back is kinda misleading cuz the tire is about a foot away from the bedside....



whenever i get the cash im gonna order my long travel suspension so the front will be a little bit lower but everything fits cuz of the fiberglass fenders...



this pic is of 17's and 35s

 

got the rest of my 20s and 37s mounted and painted my grill!

 

Your truck looks good can't wait till you get it all put back together

 

So is this a GMC with a chevy front end?

 

yup..