408/m6/9inch 1 stage-dry... numbers in sig... at christmas gets 2nd stage and light weight parts...... and a 2step ...

 

stock motor viper, small twins, built diff, built trans. Should do well at the mile and crandall

 

Most of you, some of ya'll. Being a little selective aren't you???

-Dave

 

**UPDATE**

Sent my PCM to RPM today to have a basic SD tune so I can get her running this saturday to check for leaks, etc. I plan on having on the rollers 9/12/09 and hopfully making some good #'s! Gonna try 6lbs all the way to 15lbs!

I will keep all posted!

 

Winner.

 

Nope, mine will out run that on the track anyday.

 

It is just going to be a fun street car.it will be a good hwy car.

 

It is not a track car.what do u have? This car is a hwy car. We can run them FRUM ROLL

 

You will still get drug! hahahahaha That is old man

 

Frum roll is for ****, only go from a dig. Just giving you a hard time Jeremy, your car will be nice when it's finished but not as quick as mine.

 

5.3L w/ a MP t-70 in my 94 Z28... 12 bolt and rest of suspension going in this weekend. finally...

 

Nice! Doing a front mount? 317 heads?

 

434 SBC in my 87 Camaro, AFR 227 eliminators, huge sr, 11:1 cr, etc.. Shooting for 600whp on motor and then 800+whp on the juice. T-56 and 3100lbs w/driver, pump gas car.
Will yall be ready to get drug by a 3rd gen? ETA 6 months.

 

sounds like a nice set up except for the T-56, ditch that peice of junk and go fast.

 

I'm starting to agree with the above.

I am going to give the t-56 a chance, but I wonder just how fast my car will be with a glide making 600-700rwhp.

 

Its a personal preference, I gotta row my own gears I also love running a deep rear end gear and still being able to cruise @1800rpms at 80mph. Im gonna give it a shot, its a viper spec'd setup and Ill be staying away from the hard launches as much as possible.

 

420 inch LSX block , ET LS7 top end , billet 114MM turbo A/W ...eta 60 to 90 days.

 

Back from the dead.............again. Look forward to seeing what it does Sean. Who is doing your fabrication?

 

Thats the plan, lol.. Debating on wether or not I want to order a KYTP kit or a DIY and do my own.. Being as this is my first turbo venture im thinking the first option so I can get an idea.. I do have some C6 manifolds to keep AC... lol, its really up for grabs though until I actually buy it..

wowww... any pics of the motor buildup?

 

Geo Metro 75 shot.