do they do friendly inspections?

matt is a kick *** tuner. he tuned the holy **** out of my SS when he was over at RPM.

 

lol

I remember Sean throwing a fit because I didn't know I had a nail in my tire once and got a flat while on it. lol

 

Agree. However, no dyno thread is complete until a few other guys jump in and talk about how their car with less mods dyno'd higher.

Happens every time.

My bone stock '99 Z28 dyno'd 750 RWHP with one bad spark plug wire.

Seriously, my '99 put down 350 RWHP with very similar mods and it's an M6 which accounts for the difference right there. Plus no two dynos are going to read the same, we all know that. I feel the OP put down solid/normal numbers for his mods.

 

Did they tune it or just do dyno pulls? The reason i ask is that you really don't have any mods that would require a tune, just curious.

 

its 299$ for the tune.

im iffy on these numbers you said for a stock car... doesnt seem right to me

 

yea he does good work.

lol i had a stock firehawk that put down 700rwhp with a missing piston... thanks for the reply i thought they were decent numbers for whats done

both, they did dyno pulls to tune it... i needed a tune because i dont have cats and took off all the egr and air stuff so the engine light was on therefor i could not get inspected without a tune.

 

I dont believe they do inspections.

 

I see. I know 3 of the mechanics that work there, all 3 are excellent mechanics. James is the only person that tunes my car and has for along time and Matt tuned it along time ago both are really good tuners.

 

where is this at, and how much for some dyno runs w a tune??

 

that is some pretty good power. 345rwtq on a couple of boltsons through an auto is nice. you plan to stall it soon?

 

They are in Addison, you'd have to call for pricing.

 

stout numbers for a auto. what kind of dyno was it? my car put down 350hp/365tq with same mods except i have a big stall and a catted ypipe.

 

its in Addison. tunes are 299 with dyno pulls, depending on how long it takes maybe a little more...

thanks, yes i plan to put a 3600 stall in it very soon

thanks, it was a dynojet...