eBay electric cutout?
#24
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Jun 2006
Location: Houston, TX
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
They ended up having to weld a short tip on the end of the cutout that was cut to divert exhaust flow downward and away from the floorboard (under back seat). Be aware that some exhaust shops may not want to mess with it.
Your exhaust system may be a little different and easier to find a place to put it.
Would I do it again? Yes. Hope this helps.
#26
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Jun 2006
Location: Houston, TX
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I was thinking about doing this also. You would definitely be able to do it for duals. All you have to do is twist the power wires together to form one connection. You'll have four wireless remotes and you'll only need one. (Each cutout comes with two remotes)
#31
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
You can use any power source. I had DMH cutouts wired to my cigarette lighter on my Z06. They ended up toasting the 20 amp fuse about once a month. Not sure about an Fbody. I'd look at the power windows or another source if it is the same.
#32
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
ok cool, hmm I want to try these out once I get my y pipe and lt's