looking for new shop in DFW
08-20-2010, 06:04 PM
#1
Teching In
Thread Starter
iTrader: (6)
Join Date: Mar 2005
Location: Dallas
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
looking for new shop in DFW Hey guys... I live in the grapevine area and I was looking for a new shop that does work on 4th gen Fbodies in DFW. I use to go to RPM in Lewisville, but they went out of business. The car I am wanting to service is a 2002 z28.
I am also looking for a solid shop in area that does work on our axles, I think I am losing a bearing in the rear axle. Sounds like a small chatter(like roller skates sound) when cruising at certain speeds.
Thanks again guys, and any help would be appreciated...
I am also looking for a solid shop in area that does work on our axles, I think I am losing a bearing in the rear axle. Sounds like a small chatter(like roller skates sound) when cruising at certain speeds.
Thanks again guys, and any help would be appreciated...
08-20-2010, 06:24 PM
#4
Teching In
Thread Starter
iTrader: (6)
Join Date: Mar 2005
Location: Dallas
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Couple of issues I know I need to fix on the car now are tranny fluid change, fix whatever the issue in the axle is and then changing the front rotors and pads since the factory ones are starting to warp a tad..
As to the shop I am looking for. I guess I am looking for a shop that can tune, and modify the motor as I want to tear into it more. As of right now it has every bolt on possible so I am looking to start doing suspension and internal work on the motor within the next year.. I had HP tuners for tuning from RPM, I am not sure if there is a better program to switch to, or stick with that....
As to the shop I am looking for. I guess I am looking for a shop that can tune, and modify the motor as I want to tear into it more. As of right now it has every bolt on possible so I am looking to start doing suspension and internal work on the motor within the next year.. I had HP tuners for tuning from RPM, I am not sure if there is a better program to switch to, or stick with that....
08-20-2010, 07:34 PM
#6
11 Second Club
iTrader: (14)
Join Date: Aug 2010
Location: North Dallas
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
Couple of issues I know I need to fix on the car now are tranny fluid change, fix whatever the issue in the axle is and then changing the front rotors and pads since the factory ones are starting to warp a tad..
As to the shop I am looking for. I guess I am looking for a shop that can tune, and modify the motor as I want to tear into it more. As of right now it has every bolt on possible so I am looking to start doing suspension and internal work on the motor within the next year.. I had HP tuners for tuning from RPM, I am not sure if there is a better program to switch to, or stick with that....
As to the shop I am looking for. I guess I am looking for a shop that can tune, and modify the motor as I want to tear into it more. As of right now it has every bolt on possible so I am looking to start doing suspension and internal work on the motor within the next year.. I had HP tuners for tuning from RPM, I am not sure if there is a better program to switch to, or stick with that....
Jason at TDP for your rear end and transmission
Not sure about your rotors & pads though
