Anyone heard of Thompson Motor Sport in wylie?
03-11-2011, 11:13 AM
#22
It is narrow but works well. It is a private drive to the shop that allows slightly more than 1/8mile for accel (more with good brakes) then a little more than 1/8mile for decel. There is no prep on the roadway as it is multi purpous, but also no police with sneeky radar guns as it is private owned. Works well for tuning.
03-11-2011, 11:27 AM
#23
This is good to see.... Welcome and thanks for being a sponsor.
Sorry if any of my post might have sounded bad.. You can see why people are so skeptical with Craigslist and the scams that go's along with them.
Hope your company the best and look forward to seeing some of your LS1 builds.
- Sean
Sorry if any of my post might have sounded bad.. You can see why people are so skeptical with Craigslist and the scams that go's along with them.
Hope your company the best and look forward to seeing some of your LS1 builds.
- Sean
Last edited by SSHAWK; 03-11-2011 at 11:34 AM.
03-11-2011, 11:52 AM
#24
TECH Regular
Thread Starter
iTrader: (11)
Join Date: Nov 2005
Location: DFW Tx
Posts: 446
Likes: 0
Received 0 Likes
on
0 Posts
It is narrow but works well. It is a private drive to the shop that allows slightly more than 1/8mile for accel (more with good brakes) then a little more than 1/8mile for decel. There is no prep on the roadway as it is multi purpous, but also no police with sneeky radar guns as it is private owned. Works well for tuning.
03-11-2011, 12:02 PM
#26
That was a cust car at the meet. It actually has one of our 9" rear ends in it. Ask him any time to see it he is a nice guy. No problem with the CL post, i have been caught on the bad side of a couple of scams so i see where you are coming from. CL gets phone calls and a little work for no charge to list. Thank you for clearing the air on the matter. I appreciate the honesty no matter the case.
03-11-2011, 01:13 PM
#28
No problem with the CL post, i have been caught on the bad side of a couple of scams so i see where you are coming from. CL gets phone calls and a little work for no charge to list. Thank you for clearing the air on the matter. I appreciate the honesty no matter the case.
Again best of luck with the new shop.
Cool logo BTW.
03-11-2011, 01:33 PM
#29
TECH Regular
Thread Starter
iTrader: (11)
Join Date: Nov 2005
Location: DFW Tx
Posts: 446
Likes: 0
Received 0 Likes
on
0 Posts
That was a cust car at the meet. It actually has one of our 9" rear ends in it. Ask him any time to see it he is a nice guy. No problem with the CL post, i have been caught on the bad side of a couple of scams so i see where you are coming from. CL gets phone calls and a little work for no charge to list. Thank you for clearing the air on the matter. I appreciate the honesty no matter the case.
03-11-2011, 02:05 PM
#30
http://thompsonmotorsports.net/Trans..._Rear_End.html
here is a link to it on the web site. I have some pictures of it installed that will be loaded soon. let me know if you have any questions.
here is a link to it on the web site. I have some pictures of it installed that will be loaded soon. let me know if you have any questions.
03-11-2011, 08:04 PM
#31
On The Tree
iTrader: (6)
Join Date: Apr 2008
Location: Garland
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
why you would use this rear when you can get a FAB 9 inch housing with a tq arm and ds loop for 2650 from midwest...i mean a torque arms around 479 driveshaft loops 100, and you get a fab housing thats considerably lighter for less
03-12-2011, 02:11 PM
#32
It looks like a very nice rear end, also a good deal. We have not installed them so i cant say anything on quality but it looks good. Our rearend with the same components including a spohn tq arm and driveshaft loop included, assembled and ready to install is $2550. I do know we have had no issues so i would give that as reason. Thank you for the inquiry on reasoning.
08-27-2011, 11:07 AM
#34
Launching!
iTrader: (20)
Join Date: Oct 2009
Location: Chattanooga, TN
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
bringing it back....just ordered an engine from them...they kept in contact with me and almost always 99% answers the ph and returns ph calls...that right there is something not seen to often....been really satisfied with there support..engine should be arriving shortly will keep you all posted if any one has questions or concerns
George
George
09-08-2011, 08:48 AM
#35
Will be ordering a shortblock from them this week, Kyle has been very patient with me throght he proccess as I have had some bad luck with builds in the past 
.
I will be doing a full write up in the hybrids section I may go into the quality of the shortblock if warrented good or bad. I have talked to a few of his customers and they are all very happy with there work.
.I will be doing a full write up in the hybrids section I may go into the quality of the shortblock if warrented good or bad. I have talked to a few of his customers and they are all very happy with there work.
09-08-2011, 03:43 PM
#38
Jmac tried to buy one took over 4 months.. I want to say at the 5 month mark he just asked for his money back which they gave it back to him.
I'm in the market to buy one right now...If MWC could promise me I would have it in less then a two month I would buy it.
But looks like Im going to be going with Mosers 9.
I'm in the market to buy one right now...If MWC could promise me I would have it in less then a two month I would buy it.
But looks like Im going to be going with Mosers 9.
craigslist, dallas, ls1tech, motor, motorpsorts, motorsport, motorsports, mr2litre, reviews, sport, sports, texas, thompson, tx, wylie
