koni shocks install
Thread Starter
On The Tree
Joined: Nov 2007
Posts: 146
Likes: 0
From: San Antonio
koni shocks install So we installed the koni adjustables yesterday front and rears. Once we got done we realized there was a washer looking part in the box left over... anybody know where this goes? Its about 3 inches in diameter and about 1/8 inch thick with a small whole in the middle..... I think thats the best way to descibe it.Please let me know if youll have an idea on where that goes... thank you
Take a quick picture of it and post it up here.
__________________
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!
Sounds like a washer that goes above or below a bushing on the rears or is it the one in the picture in the link below.
http://www.jegs.com/i/Koni/610/8241-...oductId=757238
http://www.jegs.com/i/Koni/610/8241-...oductId=757238
Yeah I would say it's the washer for the back also. If you didn't reuse the stock one prepare for some rattles. I forgot mine on my shock install and the rear shock would smack off the bottom of the car over every bump. It's fixed now so it's all good.
Thread Starter
On The Tree
Joined: Nov 2007
Posts: 146
Likes: 0
From: San Antonio
Sounds like a washer that goes above or below a bushing on the rears or is it the one in the picture in the link below.
http://www.jegs.com/i/Koni/610/8241-...oductId=757238
http://www.jegs.com/i/Koni/610/8241-...oductId=757238
I found this picture online too. its that washer looking part....
Last edited by lil-bit; Aug 12, 2011 at 11:03 AM. Reason: wrong image
Trending Topics
It looks like the washer that sits below the upper shock mount in the front.
__________________
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302
Find a Quality alignment shop near you!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
If that is the washer I'm thinking of, yes, it's important. It goes on the front shocks, on the piston between the shock body and the "cup". It gives the cup a level surface to sit on.
See this article: http://www.gmhightechperformance.com...o/viewall.html
-Mike
See this article: http://www.gmhightechperformance.com...o/viewall.html
-Mike
