Hellraiser C6Z Motor Pass @ RPR

Thread Tools
 
Search this Thread
 
Old 11-21-2011 | 07:06 PM
  #61  
Hellraiser#1's Avatar
formerly Chris p 02 (11-04-2011)
 
Joined: Sep 2008
Posts: 18
Likes: 0
Default

Originally Posted by ProStreet_632
God damn back the truck up fellas. I go out of town for the day and someone is calling Hellraiser out with my car. 1st off I have been on this site for 7 or so years and I never call anybody out, that is not me. I like to chill out and enjoy what I have. 2nd of all, why the hell would I call a car out that is at least a half a sec faster then me? I wouldn't so we can squash that right now. Besides my car will run a 9.90 with a real driver, me driving forget about it best I have done is 10.4. Hellraiser if that was a motor pass, that is one hell of a pass after the hiccup off the line. Big speed you have and if you do spray it my ZR1 would not have a chance. If you want a real race with my ZR1, Steven drives for me, but even with him driving you are too fast.

And to everyone else who wants to call me a sissy you have no idea what type of person I am. So relax, if I want a driver I will have 1. I think a 1 legged person can drive a standard better than me.

And Bully, if you only think Marks car makes 650, check again. And my latest go round at the shop got me a nice friendly driver clutch in the car. No pullies were changed, no other mods to the engine, my basically stock ZR1 is maxed out at 15-16 #s of boost. Runs pretty good for what it is.

Andrew
This is why I like the owner of the car to call me out! I ment no disrespect to you by my post! welcome home!
Old 11-21-2011 | 08:07 PM
  #62  
charlie_gonzales's Avatar
TECH Apprentice

iTrader: (12)
 
Joined: Jun 2006
Posts: 364
Likes: 1
From: Houston, Tx
Default

Hellraiser you don't have the factory hood on your car do you? I saw a silver c6 z heading east on 10 Friday around 4-4:30 on the out skirts of Houston and was just wondering if it was you heading to the track.
Old 11-21-2011 | 08:19 PM
  #63  
rollin2160's Avatar
TECH Apprentice
 
Joined: Jan 2011
Posts: 317
Likes: 0
From: Richmond
Default

You are right Hellraiser,I should have started by saying, dam nice pass. But, if I thought it was a turd wouldnt have much interest in it. I will be able to sway Andrew into mixing it up a bit.
Old 11-21-2011 | 08:20 PM
  #64  
BT03mach-1's Avatar
Launching!

 
Joined: Mar 2004
Posts: 246
Likes: 0
From: Friendswood, TX
Default

its about time ls1 tech is getting some **** talking going again!
Old 11-21-2011 | 08:24 PM
  #65  
BT03mach-1's Avatar
Launching!

 
Joined: Mar 2004
Posts: 246
Likes: 0
From: Friendswood, TX
Default

hellraiser vs shelby mark will be a good race!
Old 11-21-2011 | 08:36 PM
  #66  
5w20's Avatar
TECH Junkie
iTrader: (21)
 
Joined: Oct 2003
Posts: 3,419
Likes: 0
From: Houston , Tx
Default

rolling2160 =

Old 11-21-2011 | 08:52 PM
  #67  
Mike TexaSS's Avatar
8 Sec Tuner
iTrader: (2)
 
Joined: Jan 2002
Posts: 4,641
Likes: 0
From: Wish I was in a boat fishing...
Default

Originally Posted by 1sickz28
* playing devils advocate*


that's a long drive from where you live lol, if I recall you gotta drive past the 2351 exit in order to go to LMR. But you could've exited 2351 and gone to G-force....


hmmmm interesting. Drive WAY further and pay LMR to do something g-force would've done for close to free... There's gotta be more too it....
We screwed him over and blew up his motor.

The bully hates gforce.
Old 11-21-2011 | 08:59 PM
  #68  
sc300's Avatar
TECH Regular

 
Joined: Aug 2004
Posts: 464
Likes: 0
Default

What a bunch of noobs...10.4 and some of you guys think it fast?


That was like 2005..

http://www.youtube.com/watch?v=4yAX3...e_gdata_player


Let me know when ya run some 9's and I will come out and play..


Duy
Old 11-21-2011 | 09:02 PM
  #69  
5w20's Avatar
TECH Junkie
iTrader: (21)
 
Joined: Oct 2003
Posts: 3,419
Likes: 0
From: Houston , Tx
Default

Old 11-21-2011 | 09:10 PM
  #70  
Hellraiser#1's Avatar
formerly Chris p 02 (11-04-2011)
 
Joined: Sep 2008
Posts: 18
Likes: 0
Default

Originally Posted by charlie_gonzales
Hellraiser you don't have the factory hood on your car do you? I saw a silver c6 z heading east on 10 Friday around 4-4:30 on the out skirts of Houston and was just wondering if it was you heading to the track.
no sir, I was close to Houston around 6:30ish. My hood is factory...
Old 11-21-2011 | 09:15 PM
  #71  
Hellraiser#1's Avatar
formerly Chris p 02 (11-04-2011)
 
Joined: Sep 2008
Posts: 18
Likes: 0
Default

Originally Posted by rollin2160
You are right Hellraiser,I should have started by saying, dam nice pass. But, if I thought it was a turd wouldnt have much interest in it. I will be able to sway Andrew into mixing it up a bit.
lol...its all good brother, I like to run the car. The bull **** before and after is the best part. its not about shops or who has more money or whos car looks better etc. its about going out and dragen some *** etc. Like I said I ment no disrespect to either one of you. no need in hurt feeling over a run!

Last edited by Hellraiser#1; 11-21-2011 at 09:35 PM.
Old 11-21-2011 | 09:23 PM
  #72  
Hellraiser#1's Avatar
formerly Chris p 02 (11-04-2011)
 
Joined: Sep 2008
Posts: 18
Likes: 0
Default

Originally Posted by sc300
What a bunch of noobs...10.4 and some of you guys think it fast?


That was like 2005..

http://www.youtube.com/watch?v=4yAX3...e_gdata_player


Let me know when ya run some 9's and I will come out and play..


Duy
don't know if you seen your video but you only went 10:3 at 122 so where are the 9's? 2005 no new ones?
Old 11-21-2011 | 09:27 PM
  #73  
Hellraiser#1's Avatar
formerly Chris p 02 (11-04-2011)
 
Joined: Sep 2008
Posts: 18
Likes: 0
Default

Originally Posted by Mike TexaSS
We screwed him over and blew up his motor.

The bully hates gforce.
if anything you helped him make that POS some what fast!
Old 11-21-2011 | 09:36 PM
  #74  
khenry's Avatar
Staging Lane
iTrader: (3)
 
Joined: Sep 2008
Posts: 78
Likes: 0
From: Brazoria, Texas
Default

I love trashing motors.....seems to be my new hobby. It is ALWAYS better when someone else does it for you.
Old 11-21-2011 | 09:47 PM
  #75  
Hellraiser#1's Avatar
formerly Chris p 02 (11-04-2011)
 
Joined: Sep 2008
Posts: 18
Likes: 0
Default

Originally Posted by khenry
I love trashing motors.....seems to be my new hobby. It is ALWAYS better when someone else does it for you.
I think yours was operator era trying to keep up with a vette your new one should do good
Old 11-21-2011 | 09:58 PM
  #76  
Sabotage's Avatar
Teching In
 
Joined: Nov 2011
Posts: 1
Likes: 0
Default

Originally Posted by ProStreet_632
God damn back the truck up fellas. I go out of town for the day and someone is calling Hellraiser out with my car. 1st off I have been on this site for 7 or so years and I never call anybody out, that is not me. I like to chill out and enjoy what I have. 2nd of all, why the hell would I call a car out that is at least a half a sec faster then me? I wouldn't so we can squash that right now. Besides my car will run a 9.90 with a real driver, me driving forget about it best I have done is 10.4. Hellraiser if that was a motor pass, that is one hell of a pass after the hiccup off the line. Big speed you have and if you do spray it my ZR1 would not have a chance. If you want a real race with my ZR1, Steven drives for me, but even with him driving you are too fast.

And to everyone else who wants to call me a sissy you have no idea what type of person I am. So relax, if I want a driver I will have 1. I think a 1 legged person can drive a standard better than me.

And Bully, if you only think Marks car makes 650, check again. And my latest go round at the shop got me a nice friendly driver clutch in the car. No pullies were changed, no other mods to the engine, my basically stock ZR1 is maxed out at 15-16 #s of boost. Runs pretty good for what it is.

Andrew

I saw your car at LMR last week and love the wheel combo you went with My ZR1 is in the same maxed out boat, only thing left for me is some head work, TB & clutch then thats it till I blow it up
Old 11-21-2011 | 10:08 PM
  #77  
sc300's Avatar
TECH Regular

 
Joined: Aug 2004
Posts: 464
Likes: 0
Default

Originally Posted by Hellraiser#1
don't know if you seen your video but you only went 10:3 at 122 so where are the 9's? 2005 no new ones?


Thats why I posted that was 2005..

9's?? Been there, done that..


We can set something up at the track in a few weeks if you like..I know you're just having fun..me too...

We can meet some where and do some highway passes on the way to the track..
Old 11-21-2011 | 10:13 PM
  #78  
SouthTexasBully's Avatar
Thread Starter
Staging Lane
iTrader: (1)
 
Joined: Oct 2010
Posts: 59
Likes: 0
From: Brazoria County
Default

Originally Posted by 1sickz28
* playing devils advocate*


that's a long drive from where you live lol, if I recall you gotta drive past the 2351 exit in order to go to LMR. But you could've exited 2351 and gone to G-force....


hmmmm interesting. Drive WAY further and pay LMR to do something g-force would've done for close to free... There's gotta be more too it....
I was running a 200 shot on my stock shortblock and i called G-Force to see what they thought about turning my shot up to 250,they told me they didnt recommend it being that im already 700rwhp on the 200 shot and on the stock shortblock but they said they would do it if i absolutely insisted.I know Mike and i know he doesnt like to go overboard and risk blowing **** up so i decided to go to a different shop to turn my shot up to 250.In fact when i called Steven @ LMR i even explained to him that I didnt feel like Mike was all that comfortable turning up the spray even more.i went to LMR for this 1 reason and it was only out of respect for Mike and G-Force and not wanting to put him in a situation that i know he would advise me to stay away from.Steven did what i asked him to do and for that i respect him as well.G-Force is my shop but i have nothing against LMR.In fact i dont know why people have to drag shops into these **** talkin threads.. Good try though Flash,and while we are on the subject would you like to explain the continuous "issues" you have had with your vette and why you now take your car to a different shop??? I will leave the names of the shops out becuase i dont roll like that but if you care to explain yourself here is your chance Everyones watching,we'll wait
Old 11-21-2011 | 10:22 PM
  #79  
Hellraiser#1's Avatar
formerly Chris p 02 (11-04-2011)
 
Joined: Sep 2008
Posts: 18
Likes: 0
Default

Originally Posted by sc300
Thats why I posted that was 2005..

9's?? Been there, done that..


We can set something up at the track in a few weeks if you like..I know you're just having fun..me too...

We can meet some where and do some highway passes on the way to the track..
sounds good to me. Im always looking for faster people! Thanks for the invite!
Old 11-21-2011 | 10:25 PM
  #80  
FlashWS6's Avatar
Destroyer of Exotics

iTrader: (18)
 
Joined: May 2007
Posts: 388
Likes: 0
From: Houston tx
Default

Originally Posted by SouthTexasBully
I was running a 200 shot on my stock shortblock and i called G-Force to see what they thought about turning my shot up to 250,they told me they didnt recommend it being that im already 700rwhp on the 200 shot and on the stock shortblock but they said they would do it if i absolutely insisted.I know Mike and i know he doesnt like to go overboard and risk blowing **** up so i decided to go to a different shop to turn my shot up to 250.In fact when i called Steven @ LMR i even explained to him that I didnt feel like Mike was all that comfortable turning up the spray even more.i went to LMR for this 1 reason and it was only out of respect for Mike and G-Force and not wanting to put him in a situation that i know he would advise me to stay away from.Steven did what i asked him to do and for that i respect him as well.G-Force is my shop but i have nothing against LMR.In fact i dont know why people have to drag shops into these **** talkin threads.. Good try though Flash,and while we are on the subject would you like to explain the continuous "issues" you have had with your vette and why you now take your car to a different shop??? I will leave the names of the shops out becuase i dont roll like that but if you care to explain yourself here is your chance Everyones watching,we'll wait
Prices homie. Im not made of money. Plus a good friend opened up his own shop so now I let em work on my car and I pay less.

Btw I still rock an LMR sticker and their plate cover on my car since they did 97% of the work.

Steven @ LMR knows this and guess what he doesn't hold a grudge against me.



All times are GMT -5. The time now is 06:24 PM.