Help!!! I need ideas!!! :)
#21
11 Second Club
iTrader: (15)
Join Date: Jun 2006
Location: San Antonio, Tx
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
I'd start with a Lid, Longtube headers and full exhaust with a cutout, get rid of the accordian bellow, torque arm, Control arms, Pan hard bar, Sticky tires, and of course just to drag his *** harder a 150 shot. wet plate kit ofcourse.
#24
Teching In
Thread Starter
Join Date: Jul 2010
Location: Fort Worth,TX
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
#30
Teching In
Thread Starter
Join Date: Jul 2010
Location: Fort Worth,TX
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
#31
TECH Fanatic
iTrader: (11)
Join Date: Dec 2004
Location: Dragging 408's
Posts: 1,790
Likes: 0
Received 0 Likes
on
0 Posts
Just put some long tubes a good cat-back a lid and have your throttle body ported..
All that on a bone stock car should get you to around 350 rwhp..
I started with all that and really enjoyed it..
If you need advice, I can help I've had many combinations on my car..
#32
Teching In
Thread Starter
Join Date: Jul 2010
Location: Fort Worth,TX
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Well, be careful what you do.. I turned mine into a street/strip car, cut up the floor boards and all to fit suspension pieces and what not.. took off the stripes etc etc..
Just put some long tubes a good cat-back a lid and have your throttle body ported..
All that on a bone stock car should get you to around 350 rwhp..
I started with all that and really enjoyed it..
If you need advice, I can help I've had many combinations on my car..
Just put some long tubes a good cat-back a lid and have your throttle body ported..
All that on a bone stock car should get you to around 350 rwhp..
I started with all that and really enjoyed it..
If you need advice, I can help I've had many combinations on my car..