Nelson customer service
#1
Teching In
Thread Starter
iTrader: (10)
Join Date: Jan 2007
Location: San Antonio, TX
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Nelson customer service
Talked with Erica at Nelson and I have to say even after my dumb remarks, they were still nice to talk too. Might take my escalade up there to have them clean up the Cadillacs horrible shifting and torque management since the specialize in trucks...heard the 6 speed autos are a walk in the park to tune right.
Btw I apologize to the Nelson crew for the smack talk!
Any update from firemech?
Btw I apologize to the Nelson crew for the smack talk!
Any update from firemech?
#6
MASS seller approved
iTrader: (148)
Join Date: Jul 2007
Location: ELSA, South TEXAS (956) 802-7700
Posts: 1,403
Received 116 Likes
on
79 Posts
if it is because of pride, pride wont make you faster.
If it is because of lack of trust after you insulted, they have none to gain as an unsatisfied customer will spread word quickly and hurt the business.
Providing good service can only result in repeat customers referring others.
But to each their own and all is respected.
If it is because of lack of trust after you insulted, they have none to gain as an unsatisfied customer will spread word quickly and hurt the business.
Providing good service can only result in repeat customers referring others.
But to each their own and all is respected.
Trending Topics
#14
On The Tree
iTrader: (1)
Wondering how this worked out...
https://ls1tech.com/forums/15978100-post124.html
https://ls1tech.com/forums/15978100-post124.html
Last edited by Vexzer; 02-23-2012 at 08:31 AM. Reason: In before the lock!
#18
TECH Enthusiast
iTrader: (9)
Join Date: Feb 2009
Location: Langley AFB (Hampton VA)
Posts: 663
Likes: 0
Received 1 Like
on
1 Post
The car wouldnt return to the idle table, so we replaced both O2 sensors and the TPS. Then Allen did some tuning and it seems good now. Its still idling at about 1000 rpm, but he says its because the TB blade has a hole so Im trying to find one now without the hole. But the cars is driving great.
#19
TECH Enthusiast
iTrader: (9)
Join Date: Feb 2009
Location: Langley AFB (Hampton VA)
Posts: 663
Likes: 0
Received 1 Like
on
1 Post
I actually I have been told that by a few TB shops. I contacted Nick Williams today and am trying to get ahold of another 92mm TB blade first. If that falls throughI will do the JB weld thing I guess.