FS: 4ch 10 bolt w/ 4.10 gears, LCA and Alum Driveshaft
04-15-2013, 09:28 AM
#1
On The Tree
Thread Starter
iTrader: (12)
Join Date: Jan 2004
Location: League City, TX
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
FS: 4ch 10 bolt w/ 4.10 gears, LCA and Alum Driveshaft I just installed a Midwest Chassis 9" and now need to get rid of my factory 10 bolt. It is a 4 channel rear with 4.10 gears. The car has 130,000 miles. Im not sure when the 4.10 gear was installed. It was in there when I bought the car 3 years ago. I was still driving the car with the 10 bolt before I put the 9" in. It works fine. The gears do make noise at around 55-60 but otherwise there are no problems. You will have to swap you reluctor rings and backing plates when installing it since I used the ones that were on it in my 9" build. I would like to get $150 for the rear but I will take offers.
I also have the stock aluminum driveshaft that I would like to get $50 OBO for.
Lastly if anyone is interested I have the stock LCAs and panhard bar that I will give away if someone wants to come get them.
Local pickup only please. I can send pics if anyone is interested.
Thanks,
Chris
I also have the stock aluminum driveshaft that I would like to get $50 OBO for.
Lastly if anyone is interested I have the stock LCAs and panhard bar that I will give away if someone wants to come get them.
Local pickup only please. I can send pics if anyone is interested.
Thanks,
Chris
