HPE "S" CAM Dyno Results!
#23
Originally Posted by Aries
this cam idles so nicely that it started and ran in my car with a stock tune on the computer. I've since changed the tune, but it's that well mannered!
Im going to have to get one then. Hmm looks like that is where my bonus will be going.
#24
Originally Posted by 01 Red WS6
Im going to have to get one then. Hmm looks like that is where my bonus will be going.
#25
Originally Posted by SJRTX
yeah, when you get home, check out the idle vid. its not too lumpy, but it does sound mean, and it definitely makes the power(which is what were in this for right?)
Yep I sure will. I want something that makes good power but I can still drive everyday. I don't want something that makes too much lope. I would like to be a sleeper just a little. Or be able to say "ITs a baby cam"
#26
Originally Posted by SJRTX
First off...a BIG thanks to Chuck, Josh, Rick, Steven, and the rest of the crew at HPE.
To start with....i was crossing my fingers for 400-405 at the wheels with the new setup, especially since i was going to be running the Kooks 1 7/8ths, and running through the exhaust(NO CUTOUT).
The setup is a Kooks, O/R Y, Borla C/B, FAST 90mm intake/throttle body,Z06MAF and of course, the HPE's "S" cam.
Car was dynoed in street driving form-belt etc all in place. We will dyno with a cutout installed and open soon, and see if we can hit 430-435rwhp sae
The result was 424 @ 6500 SAE torque was probably in the 370 range...the dyno was reading spikes and giving a high number.
So without further adeu, here is the graph and vids....
First the Pull: http://www.horsepowerengineering.com/media/MOV01342.MPG
Here's the cam at idle: http://www.horsepowerengineering.com/media/MOV01344.MPG
and the dyno graph:
To start with....i was crossing my fingers for 400-405 at the wheels with the new setup, especially since i was going to be running the Kooks 1 7/8ths, and running through the exhaust(NO CUTOUT).
The setup is a Kooks, O/R Y, Borla C/B, FAST 90mm intake/throttle body,Z06MAF and of course, the HPE's "S" cam.
Car was dynoed in street driving form-belt etc all in place. We will dyno with a cutout installed and open soon, and see if we can hit 430-435rwhp sae
The result was 424 @ 6500 SAE torque was probably in the 370 range...the dyno was reading spikes and giving a high number.
So without further adeu, here is the graph and vids....
First the Pull: http://www.horsepowerengineering.com/media/MOV01342.MPG
Here's the cam at idle: http://www.horsepowerengineering.com/media/MOV01344.MPG
and the dyno graph:
Congrats on the great #'s Jay, im glad your satisfied. Just wait until we throw a set of our heads on that thing!!!!!
#29
Originally Posted by jruss
Nice improvement Jay. Man I need to do w/e it is you do for a living.
I was in the beater car today and say you turn off of jones road onto 1960 and saw you get into it a lil, too bad I wasnt in my car or I woulda turned around to play. Sounds really nice, now I just need to get a real cam.
#30
Originally Posted by stang killer
Yes me too.
I was in the beater car today and say you turn off of jones road onto 1960 and saw you get into it a lil, too bad I wasnt in my car or I woulda turned around to play. Sounds really nice, now I just need to get a real cam.
I was in the beater car today and say you turn off of jones road onto 1960 and saw you get into it a lil, too bad I wasnt in my car or I woulda turned around to play. Sounds really nice, now I just need to get a real cam.
j/k Donaynay
#32
Originally Posted by jruss
Nice improvement Jay. Man I need to do w/e it is you do for a living.
ps-i need to call you soon. i been outta town lately.