98 Z28
11-21-2004 | 10:07 AM
#1
Thread Starter
TECH Enthusiast
Joined: Sep 2004
Posts: 694
Likes: 0
From: Kennedale TX
98 Z28 Here's the deal. It's a 98 Z28 Stage 2 heads, custom nitrous cam, LS6 intake, headers and t/d's and of course all your other bolt-on's. 6 Point cage, Corbeau seats and an NOS Carbon Fiber 12lb bottle. Rebuilt 4L60E w/stall. And a Moser 12 bolt. And all the suspension mods also. Oh, And a set Fiske wheels. The only thing is that it needs new rings and bearings. My question to ya'll is, what do ya'll think it's worth?
11-23-2004 | 12:38 PM
#6
Originally Posted by bottlefed5.0
Here's the deal. It's a 98 Z28 Stage 2 heads, custom nitrous cam, LS6 intake, headers and t/d's and of course all your other bolt-on's. 6 Point cage, Corbeau seats and an NOS Carbon Fiber 12lb bottle. Rebuilt 4L60E w/stall. And a Moser 12 bolt. And all the suspension mods also. Oh, And a set Fiske wheels. The only thing is that it needs new rings and bearings. My question to ya'll is, what do ya'll think it's worth?
If so, it needs more then rings and bearings. It needs machine work on that block
On a side note, If u did decide to get it would you be willing to swap for a lighter plastic gas tank? Im in need of a metal tank to sump for my next setup im going with over the winter
Mike
11-23-2004 | 12:51 PM
#7
Thread Starter
TECH Enthusiast
Joined: Sep 2004
Posts: 694
Likes: 0
From: Kennedale TX
Originally Posted by V6 Bird
Is it white by chance?
If so, it needs more then rings and bearings. It needs machine work on that block
On a side note, If u did decide to get it would you be willing to swap for a lighter plastic gas tank? Im in need of a metal tank to sump for my next setup im going with over the winter
Mike
If so, it needs more then rings and bearings. It needs machine work on that block
On a side note, If u did decide to get it would you be willing to swap for a lighter plastic gas tank? Im in need of a metal tank to sump for my next setup im going with over the winter
Mike
Trending Topics
11-23-2004 | 01:38 PM
#8
Originally Posted by bottlefed5.0
No, it's red. And no I haven't bought it yet.
Mike
11-23-2004 | 01:47 PM
#9
Thread Starter
TECH Enthusiast
Joined: Sep 2004
Posts: 694
Likes: 0
From: Kennedale TX
Originally Posted by V6 Bird
Coopers old car? Thats the only one that rings a bell with those mods? Offer him $$8500. I wouldnt hesitate to offer that. It needs work and should still be in somewhat decent shape if thats the same car.
Mike
Mike
11-23-2004 | 04:30 PM
#13
Does the car still run? $8500 is a fair price I would think. You can freshen up the motor if its not hurt as far as a spun bearing yet for about $500 with all the parts. Thats all new bearings everywhere, new rings, and new gaskets and bolts.
Mike
Mike
11-23-2004 | 04:33 PM
#14
Thread Starter
TECH Enthusiast
Joined: Sep 2004
Posts: 694
Likes: 0
From: Kennedale TX
Originally Posted by V6 Bird
Does the car still run? $8500 is a fair price I would think. You can freshen up the motor if its not hurt as far as a spun bearing yet for about $500 with all the parts. Thats all new bearings everywhere, new rings, and new gaskets and bolts.
Mike
Mike
11-23-2004 | 07:03 PM
#16
Originally Posted by bottlefed5.0
I was just gonna tear it down and just re-ring it and bearing it. And just make sure nothing else was hurt.
Mike
11-23-2004 | 07:08 PM
#17
Thread Starter
TECH Enthusiast
Joined: Sep 2004
Posts: 694
Likes: 0
From: Kennedale TX
Originally Posted by V6 Bird
When you are ***** deep, do it right. You wont regret it later. That car has some mileage on it for sure. Let me know when and if you do it. Ill give you a hand and where to get the stuff you will need at a good cost!
Mike
Mike