Ravenous T\A and joeformula
Thread Starter
Teching In
Joined: Dec 2004
Posts: 40
Likes: 0
From: Arlington,Tx
Ravenous T\A and joeformula Wuzzup ******!!!!!
New guy here, Hi everyone... I figured since i work with Ravenous T\A and hear about all the b/s that sometimes goes down on this site, and i know joe i might as well register
New guy here, Hi everyone... I figured since i work with Ravenous T\A and hear about all the b/s that sometimes goes down on this site, and i know joe i might as well register
Last edited by PoorSVTMan; Dec 8, 2004 at 09:35 PM.
Originally Posted by PoorSVTMan
Wuzzup ******!!!!!
New guy here, Hi everyone... I figured since i work with Ravenous T\A and hear about all the b/s that sometimes goes down on this site, and i know joe i might as well register
New guy here, Hi everyone... I figured since i work with Ravenous T\A and hear about all the b/s that sometimes goes down on this site, and i know joe i might as well register
Trending Topics
Thread Starter
Teching In
Joined: Dec 2004
Posts: 40
Likes: 0
From: Arlington,Tx
Mods-
6lb lower pulley
100mm idler pulleys
custom built valve body in tranny
Open air filter
Shorty headers
High flow cats
x pipe with dyno max race bullet mufflers
Chip
Phenolic spacer
T-bars are coming sunday.
think thats it
I need a new tune on my chip since its pretty conservative tune
I finaly ran 1/4 mile last saturday with new slicks and playing with air pressures and dealing with poor track prep. I managed to squeeze out a 12.80
Heres the other numbers
r/t .632
60' 1.948
1/8 8.219
mph 86.11
1/4 12.803
mph 103.34
I know with the tbars and getting the right air pressure in the slicks and a new tune i can put away that 12.8.
6lb lower pulley
100mm idler pulleys
custom built valve body in tranny
Open air filter
Shorty headers
High flow cats
x pipe with dyno max race bullet mufflers
Chip
Phenolic spacer
T-bars are coming sunday.
think thats it
I need a new tune on my chip since its pretty conservative tune
I finaly ran 1/4 mile last saturday with new slicks and playing with air pressures and dealing with poor track prep. I managed to squeeze out a 12.80
Heres the other numbers
r/t .632
60' 1.948
1/8 8.219
mph 86.11
1/4 12.803
mph 103.34
I know with the tbars and getting the right air pressure in the slicks and a new tune i can put away that 12.8.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
TECH Fanatic
Joined: Aug 2004
Posts: 1,435
Likes: 0
From: Burleson, Tx
Hey man, It's Matt... I'm guessing your Eric?
We talked about meeting up tonight but Kirk told me last night that he didn't know if he would be able to make it tonight... So we will see, but I'm sure we will run again sometime.
We talked about meeting up tonight but Kirk told me last night that he didn't know if he would be able to make it tonight... So we will see, but I'm sure we will run again sometime.
Thread Starter
Teching In
Joined: Dec 2004
Posts: 40
Likes: 0
From: Arlington,Tx
Originally Posted by ProchargedCobra
What color is your Lightning and what kind of chip do you have?
Its black, im running a superchip with a custom tune....
sry for bringing this old post back up, ive been staying at my girls house and she dosent have the internet
Whats up fart knocker, not at work today huh??!?!? Hey I almost got my kit hooked up, just a little bit more wiring and my NX switches should be in today
and then I am gonna have fastech do the rest
and then I am gonna have fastech do the rest Thread Starter
Teching In
Joined: Dec 2004
Posts: 40
Likes: 0
From: Arlington,Tx
Originally Posted by Ravenous T\A
Whats up fart knocker, not at work today huh??!?!? Hey I almost got my kit hooked up, just a little bit more wiring and my NX switches should be in today and then I am gonna have fastech do the rest
and then I am gonna have fastech do the restYea i feel like total crap, been sleeping all day....